DEFINITION :
Universal undercoat for standard building surfaces, walls or ceiling, prior to final coat, wallpaper or other wall-covering.

DESTINATION :

For interior walls and ceiling, plaster, plasterboard, cement, water-based coatings (pH<9), wood and derivatives, as well as old but sound painted surfaces (interior or exterior). Final coat can be aqueous phase or alkyd-solvent.
- Nourishes and blocks surfaces
- Exceptionally smooth application
- Quick-drying: same day final coat
- Good covering and filling power
- No added solvents (VOC < 1g/L)
- Contains corrosion inhibitor
- Microporous film

 TECHNICAL SPECIFICATIONS :

 -  Binder: Alkyd and acrylic resins in aqueous dispersion
-  Aspect: Mat velvet
-  Color: White and pastel
-  Dry extract: 58% by weight, 40% by volume
-  Density: 1,4 Yield 10 to 12m2/l depending on type of surface
-  Drying: Touch dry: 30 mins*
-  Sanding: 2 hours*
-  Second coat: 4 hours* at 20°C

*depending on weather conditions and the shade of color applied

 SURFACE PREPARATION :

 The surface must comply with applicable DTU, notably DTU N°59.1. Prior inspection necessary in order to determine the nature of the surface and the preparation required. Surfaces must be clean and sound: it is necessary to:
- remove powdery or crumbly areas
- clean dirt or scuff marks
- degrease certain woods with DAF310 thinner
- sand shiny surfaces (lacquer, hard PVC, etc)

APPLICATION SPECIFICATIONS :

 - Application: One-coat application
-  Conditions: Interior: Temperature above 8°C, Hygrometry below 65%
-  Thinning: 0 – 5% water if porous or absorbant surface and for spray-gun application. Product ready to use on non-absorbant surfaces.
-  Tools: Brush, Medium length (12/14mm) roller, Airless spray-gun, nozzle 11 to 13, up to 5% white spirit
-  Cleaning: Water, immediately after use.

SUPPLEMENTARY INFORMATION :

-  Transport classification: Not subjected to rules governing road transport of dangerous goods.
-  Packaging: 16L, 12L, 3L
-  Storage: 12 months in unopened canisters protected from frost
-  Health and safety: Consult the safety notice available on CDRom at your distributorship or on European classification: Category A, Sub-category g (directive 2004/42/CE)
-  Max EU VOCs: For sub-category g: 30g/l (2010)
-  Max VOCs this product: 1g/l