DEFINITION :

 Universal microporous isolating undercoat and primer.

DESTINATION :

Primer for all sound, standard building surfaces (plaster and derivatives,

concrete and derivatives, wood and derivatives, ceramic, sandstone). Coverable with

aqueous phase (acrylic, vinyl, alkyd emulsion, epoxy) or solvent phase (e.g. alkyd, alkydurethane)

paints. For other finishes consult our technical support.

PROPERTIES:

- Isolates stains on plaster, plasterboard, and other surfaces.

- Blocks nicotine, soot, ink, glue stains

- blocks weeping tannins in certain woods (oak, chestnut, etc)

- Isolates graffiti, felt pen, or pencil marks.

Very versatile, AQUAPRIM ISOLANT adheres well to old alkyd paints, etched zinc,

copper, etched aluminum, galvanized steel (etched if new), glass, etc.

NB. Certain stains can appear through AQUAPRIM ISOLANT but will not be visible

after final coat.

TECHNICAL SPECIFICATIONS:

• Binder: Synthetic resins in aqueous dispersion

• Aspect: Mat velvet

• Color: White only: coloring not possible

• Dry extract: 56% by weight, 38% by volume

• Density: 1,40

• Yield: 12 m2/l

• Drying: Touch dry: 30 mins*

Sanding: 2 hours*

Second coat: 2 hours* (acrylic)

4 hours* (solvent-based)

24 hours* (isolating function)

*depending on weather conditions

Edit date: 05/07/10 Modification date: 23/12/2009

Replaces previous versions.

Before using product, check that this is the latest edition.

APPLICATION SPECIFICATIONS:

• Application: One-coat application, in general, on prepared surfaces (and old

paint after removing flaking). For maximum isolation apply a thick

coat of AQUAPRIM ISOLANT on stains or marks, allow to dry 90

mins, then apply a normal coat.

• Precautions: AQUAPRIM ISOLANT does not mix with any other paint. For use

with airless spray-gun, material must be exempt of old paints.

• Conditions: Exterior: temperature above 5°C, Hygrometry below 80%

Interior: Temperature above 8°C, Hygrometry below 65%

• Thinning: 0 – 5% water depending on porosity, otherwise ready to use.

• Tools: Brush for acrylic, textured roller (12/14mm), Airless spray-gun,

nozzle 15 to 19.

• Cleaning: Water immediately after use

SURFACE PREPARATION:

Surfaces must comply with DTUs, especially DTU N° 59.1. Prior inspection necessary in

order to determine the right surface preparation

SUPPLEMENTARY INFORMATION:

• Transport classification: Not subjected to rules governing road transport of dangerous

goods.

• Packaging: 16L, 12L, 3L, 0.75L

• Storage: 12 months in unopened canisters PROTECTED FROM FROST

• Health and safety: Consult the safety notice available on CDRom at your

distributorship

• European classification: Category A, Sub-category g (directive 2004/42/CE)

• Max EU VOCs: For sub-category g: 30g/l (2010)

• Max VOCs this product: 11g/l