Reduced distance between rollers The distance between the RR 400 roller is 2.1 mm compared with 4 or 5 mm for competitors’ products. This unique characteristic reduces the losses in load spreading capacity and consequently reduces the impacts of the packages on the rails. In total this gives better FIFO flow, silence of operation and longer roller and rail life. Riveting RR400 rollers Conventional roller tracks are characterised by the fitting of the roller on an interference fitted pin. This cheap production technique fails to prevent the common issues of the opening of the profile and the roller jumping out under heavy loads or after a long period of use. Separation of the roller from the profile causes significant loss of flow, destruction of the rail and parts to fall out. In its RR 400 roller track Trilogiq offers a durable product. RR 400 uses the technique of individual riveting of each roller to the profile. Consequently the profile is held closed and the rollers are retained permanently. Consequence: The integrity of the roller track is guaranteed over time, with continued product flow and remarkable operating silence. Free rotation riveting Another remarkable characteristic of the RR 400: The rivet is free to turn in the profile. This has several advantages: - The resulting reduction in friction (“steel on steel” instead of “steel on plastic”) allows better rotation than with rivets locked in the profile. - The reduced wear on a roller is important - Finally the silence of operation is surprising.