Industrial suppliers > SSAB SWEDISH STEEL > Our product range

Ssab Swedish Steel

SSAB Oxelösund is a member of the SSAB Swedish Steel Group and is the largest Nordic manufacturer of heavy steel plate. The company is also a world leader in the specialist field [...]

10 offers

Company profile

Offers 1 to 10 of 10

Pure industry metals

Domex cold forming steels

Domex cold forming steels are used where there is a need to increase strength without incurring a weight penalty or where a tighter bending radius than is available from [...]

Domex hardenable steels

With carbon contents up to 0.20% and low aluminium content, a range of case hardening steels is also available. Plain carbon steels are available with carbon contents from [...]

Domex Wear

Domex Wear is a formable, wear resistant steel, delivered in the as rolled condition with a hardness circa 265HB and a light mill scale. This material also exhibits excellent [...]

Corrosion resistant steels

Domex 355W and 550W are high strength and extra high strength respectively, corrosion resistant steels. They are characterised by good formability, impact toughness and [...]

The supplier's opinion
Typical applications include bridges, industrial chimney stacks and containers

Deep drawing steels

Domex 200 is a hot rolled drawing sheet possessing excellent forming properties which can be used for stretch forming and deep drawing.

Docol YP

Docol YP grades are high strength low-alloyed (HSLA) steels intended for general presswork, forming and bending operations, offering consistent properties that assist modern rapid [...]

The supplier's opinion
These grades are fully weldable by standard methods. Typical applications include automotive presswork, shelving, racking, locks and general componentry

Docol RP/BH

Docol RP/BH grades are high strength phosphorus-alloyed steels that combine their strength with excellent formability, for consistent, repeatable properties to assist [...]

The supplier's opinion
These grades offer formability close to that of mild steels. Select these materials where quite deeply drawn pressings require strength, enabling downgauging of a mild steel [...]

Docol DP/DL

Docol DP/DL grades are high strength dual-phase steels, with a 2-phase structure that gives a combination of very high strength levels, far beyond conventional mild steels, [...]

The supplier's opinion
These grades have a low yield strength in comparison with the tensile strength, but the yield strength increases substantially with both strain-hardening and bake-hardening.