Industry fair   > Safety and Security   > Access control   > Intrusion detection  

COLIRIS II, New D.I.S. cells: Innovation for greater reliability

Innovation in the service of reliability

With D.I.S. technology(Dual interlaced scanning) 100Hz (Double Interlaced Scanning 100Hz), each cell integrates the dual functions of transmitter and receiver. The infrared beams that are created are multiplexed and synchronized at a frequency of 100Hz.

Thanks to this technology, all columns are identical. The idea of separate transmission and reception modules has been surpassed.

The D.I.S.(*) TECHNOLOGY 100HZ IS INNOVATION THAT SORHEA HAS DEVELOPED IN THE QUEST FOR RELIABILITY !
* Patent pending - No. 06 02310

Dual automatic digital gain control (A.G.C.)
Dual digital AGC enables compensation for variations in the incoming signal to ensure uninterrupted operation of the barrier. This digital processing of the signal is performed based on a time curve that differentiates exterior phenomena (meteorological or others) from intrusion attempts and thereby significantly reduces the number of false alarms.

Transmitter and receiver too close together
The incoming signal level is greater than the reference level.
The AGC lowers the amplification of the signal to the reference level according to the time curve.

Adjacent Dual-beam detection and mono-beam detection time-delayed by the lower beam
      -  Détection double beams adjacents : Detection is carried out by 2 adjacent beams, avoiding the gap of non-detection of traditional barriers.
      -  Mono-detection temporisée sur le faisceau bas : The lower beam can be configured in time-delayed mono-detection mode in order to detect possible intrusions by climbing (advanced configuration by computer).

Information available for the 2 columns
COLIRIS II has output switches for each column.
This feature permits maximum limitation of wiring constraints.

You choose, with respect to your needs and constraints, where to wire alarm switches, at one end or the other of the infrared barrier.
There are multiple possibilities for wiring and output switches !

Selectable channels
Selectable channels allow installation of up to 4 adjacent barriers while preventing risk of interference among them.

Key benefits
"These particular functions provide COLIRIS II with a very high capacity for detection."


COLIRIS II la technologie D.I.S.

Product characteristics

  • Technology D.I.S.* 100HZ
  • Dual automatic digital gain control (A.G.C.)
  • Adjacent Dual-beam detection and mono-beam detection time-delayed
  • Information available for the 2 columns
  • Selectable channels

Area of usage

  • Industry
  • Logistic sites
  • sensituive sites

More offers for SORHEA SA

Open your online booth in less than 1 hour - click here