Industry fair   > Tools   > Clamping tools, Tightening tools   > SCHUNK INTEC > Our product range 

Offers 1 to 41 of 41

See all the company's offers

Clamping tools, Tightening tools 

View bigger picture
Manual Chucks with quick change jaws
Contact SCHUNK INTEC

Manual Chucks with quick change jaws

The manual chucks with jaw quick-change system ROTA-S plus (angled serrated base jaws) ensure optimum results in workpiece clamping, especially on cyclecontrolled lathes. The [...]
View bigger picture
Manual chucks with straight serrated base jaws
Contact SCHUNK INTEC

Manual chucks with straight serrated base jaws

The manual chucks with quick jaw change system ROTA-G (straight serrated base jaws) ensure optimum results in workpiece clamping, especially on cyclecontrolled lathes. The wedge [...]
View bigger picture
Scroll chuck
Contact SCHUNK INTEC

Scroll chuck

The SCHUNK product group ROTA Classic consists of a precision scroll chuck, cast disks and face plates made of steel. The scroll chucks are available in different versions. Within [...]
View bigger picture
Power chuck quick change jaws
Contact SCHUNK INTEC

Power chuck quick change jaws

The wedge bar power chuck ROTA THW plus is distinguished by its high flexibility. This ensures the integrated quick jaw change system as well as the modular exchangeable center [...]
View bigger picture
Wedge bar power chuck
Contact SCHUNK INTEC

Wedge bar power chuck

The wedge bar power chuck ROTA THWB with the quick jaw change system is equipped with extra wide base jaw guidances. These guidances are the basis for extremely stable clamping [...]
Up
View bigger picture
Power chuck with quick jaw change
Contact SCHUNK INTEC

Power chuck with quick jaw change

Power chuck with quick-jaw-change system. Within just two minutes, the basic chuck ROTA THW vario can be equipped with a collet chuck or an expansion arbor. The chuck always [...]
View bigger picture
Wedge bar chuck with through hole
Contact SCHUNK INTEC

Wedge bar chuck with through hole

The design of the SCHUNK wedge bar power chuck ROTA NCD is based on the patented idea of high precision clamping of the smallest workpiece diameters with SCHUNK collet jaws. At [...]
View bigger picture
Power chuck with centrifugal force compensation
Contact SCHUNK INTEC

Power chuck with centrifugal force compensation

The new power chuck with centrifugal force compensation was developed for highest demands in modern lathes. The serrated jaw guidance ensures the highest stiffness and precision [...]
View bigger picture
Power chuck high precision
Contact SCHUNK INTEC

Power chuck high precision

The new power chuck was developed to meet the highest demands on modern lathes. The serrated jaw guidance ensures the highest stiffness and precision due to appropriate guiding [...]
View bigger picture
Wedge hook power chuck
Contact SCHUNK INTEC

Wedge hook power chuck

With the design of the wedge hook power chuck ROTA NCK plus, SCHUNK offers a chuck for everyday applications on CNC-lathes at a reasonable price. The chuck is distinguished by [...]
Up
View bigger picture
Wedge hook power chuck without through-hole
Contact SCHUNK INTEC

Wedge hook power chuck without through-hole

The wedge hook power chuck is excellently protected against dirt and chips. The technology of the ROTA NCO guarantees the highest precision and life time for applications on [...]
View bigger picture
2-jaw-chuck
Contact SCHUNK INTEC

2-jaw-chuck

Largest jaw strokes at high clamping forces. This distinguishes the 2-jaw-chuck ROTA 2B from SCHUNK. Especially recommended for clamping fi ttings. Standard mounting threads allow [...]
View bigger picture
6-jaw-compensation-chuck
Contact SCHUNK INTEC

6-jaw-compensation-chuck

The 6-jaw compensation chuck has clamping jaws that oscillate in pairs for concentric clamping. Two base jaws are always connected with a pendulum body. This assures workpiece [...]
View bigger picture
Pneumatic power chuck
Contact SCHUNK INTEC

Pneumatic power chuck

The ROTA TP self-contained power chuck from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck [...]
View bigger picture
Self-contained power chuck
Contact SCHUNK INTEC

Self-contained power chuck

The ROTA TB self-contained power chuck from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck [...]
Up
View bigger picture
Self-contained power chuck with fast extended strokes
Contact SCHUNK INTEC

Self-contained power chuck with fast extended strokes

The technology of a self-contained power chuck with fast and extended stroke (LH) is based on a chuck piston with two different gear transmission ratios. This technology can be [...]
View bigger picture
Power chuck with wegde hook system
Contact SCHUNK INTEC

Power chuck with wegde hook system

Power chuck with wedge hook system and single adjusting jaws, self contained, very large chuck bore , extended stroke for part clearance, actuating pressure 2 to 10 [...]
View bigger picture
Self-contained power chuck with wedge hook system
Contact SCHUNK INTEC

Self-contained power chuck with wedge hook system

The ROTA EP self-contained power chuck from SCHUNK is equipped with an integrated pneumatic cylinder. The force transmission is effected by the proven wedge hook system. The chuck [...]
View bigger picture
Self-contained power chuck with fast stroke
Contact SCHUNK INTEC

Self-contained power chuck with fast stroke

The technology of a self-contained power chuck with fast and extended stroke (LH) is based on a chuck piston with two different gear transmission ratios. This technology can be [...]
View bigger picture
Wireless pressure control RSS
Contact SCHUNK INTEC

Wireless pressure control RSS

Wireless Presure control RSS, to monitor the clamping pressure in OD damping of the lathe chuck. Through wireless sensors, the damping pressure is controlled continuously during [...]
Up
View bigger picture
Precision chucks
Contact SCHUNK INTEC

Precision chucks

Increasing requirements with regard to accuracy, like for turning hardened material, require highest precision for the clamping operation.The new lathe chuck ROTA-P was developed [...]
View bigger picture
Semi-standard-chucks
Contact SCHUNK INTEC

Semi-standard-chucks

Various modifications to SCHUNK Standard chucks have already been realized. Most common versions differing from standard solutions(semi-standard) are::   -   [...]
View bigger picture
THL steady rests
Contact SCHUNK INTEC

THL steady rests

The standard version of the THL steady rests from SCHUNK is equipped with a safety non-return valve, a distance control, a chip protection and air purge connections. The steady [...]
View bigger picture
Center cylinder
Contact SCHUNK INTEC

Center cylinder

Scope of delivery:  -  Closed center hydraulic rotation cylinder with stroke control and bracket for analog positioning sensors.  -  Without analog positioning [...]
View bigger picture
Standard chuck jaws
Contact SCHUNK INTEC

Standard chuck jaws

The world's largest chuck jaw programme including more than 1200 different kinds of chuck jaws. For each clamping task the right solution. The standard chuck jaw programme [...]
Up
View bigger picture
Fiberglass jaws
Contact SCHUNK INTEC

Fiberglass jaws

The Advantages: High Coefficient of Friction    Approx. 3 to 4 times greater than steel using Poly-A material reinforced by glass fibre  Gentle Clamping [...]
View bigger picture
Customized jaw
Contact SCHUNK INTEC

Customized jaw

Example: Before:Work was done with the 6-point pendulum from SCHUNK’s standard range. Then, manufacturing tolerances could only be complied with to the detriment of the [...]
View bigger picture
Chuck with quick jaw change system
Contact SCHUNK INTEC

Chuck with quick jaw change system

The manual chucks with quick jaw change system ROTA-G (straight serrated base jaws) ensure optimum results in workpiece clamping, especially on cyclecontrolled lathes. The wedge [...]
View bigger picture
Special chucks
Contact SCHUNK INTEC

Special chucks

Not every workpiece can be clamped with a standard chuck - even in combination with customized chuck jaws. With more than 30 years of experience in manufacturing standard and [...]
View bigger picture
Collet Jaws
Contact SCHUNK INTEC

Collet Jaws

The patented collet-jaw system is applied for the machining of workpieces with small diameters. Collet jaws have a high repeat accuracy and are mounted via the serration on the [...]
Up
View bigger picture
Fibreglass Jaws
Contact SCHUNK INTEC

Fibreglass Jaws

The glass-fibre composite material we use enables a high coefficient of friction to be achieved and prevents the formation of clamp marks on the surface of the workpiece. [...]
View bigger picture
Pendulum Jaws
Contact SCHUNK INTEC

Pendulum Jaws

For clamping thin-walled workpieces. Deformation of the workpiece is significantly reduced by the uniform arrangement of the clamping points on the perimeter (6x60°).Also ideally [...]
View bigger picture
Quick Change Jaw System
Contact SCHUNK INTEC

Quick Change Jaw System

SCHUNK quick-change jaws impress through their simple handling, and reduce the set-up time with their rapid jaw changing. The interchangeable inserts also allow an extremely large [...]
View bigger picture
Universal-Top Jaws
Contact SCHUNK INTEC

Universal-Top Jaws

With metric tongue and groove for all wedge bar power chucks (quick jaw change) suitable. For inner, outer and bar stock clamping, very large clamping range and many more. Reduces [...]
View bigger picture
Serrated Bars
Contact SCHUNK INTEC

Serrated Bars

Available in steel or aluminium. With 90° or 60° fine serrations. Standard length 420 mm. In this way, any non-standard length can be achieved rapidly and at low cost.
Up
View bigger picture
Base Jaws with fine serrations
Contact SCHUNK INTEC

Base Jaws with fine serrations

For using finely serrated top jaws on the jaw quick-change chuck, we provide base jaws with grooves and guide strips, or with T-grooves and sliding blocks.
View bigger picture
Base Jaws with 1-/2 pitch
Contact SCHUNK INTEC

Base Jaws with 1-/2 pitch

If gap-free clamping is not possible with Claw Jaws and/or Hard Stepped Top Jaws on your quick-change chuck, you can bridge gaps with base jaws SFG-V or GBK-V (1/2 tooth offset).
View bigger picture
Customized Jaws
Contact SCHUNK INTEC

Customized Jaws

Whether you need a standard jaw or a demanding special design – our team of experts will develop the right solution for every application. SCHUNK specially designed jaws give [...]
View bigger picture
Special chucks
Contact SCHUNK INTEC

Special chucks

Not every workpiece can be clamped with a standard chuck - even in combination with customized chuck jaws. With more than 30 years of experience in manufacturing standard and [...]
View bigger picture
Pendulum Jaws
Contact SCHUNK INTEC

Pendulum Jaws

 6-Point-PendulumPendulum jaws are used to clamp thin-walled workpieces. Deformation of the workpiece is significantly reduced by the uniform arrangement of the clamping [...]
View bigger picture
Fibreglass Jaws
Contact SCHUNK INTEC

Fibreglass Jaws

The Advantages:  High Coefficient of Friction    Approx. 3 to 4 times greater than steel using Poly-A material reinforced by glass fibre  Gentle Clamping [...]
Open your online booth in less than 1 hour - click here