Saws, Chain saws
Manufacturers' and suppliers' offers for «Saws, Chain saws» . Compare offers for «Saws, Chain saws» and ask for a quote online.
Offers to 1 of 35 sur 35
Saw : DOALL
• Stock number : 5421 • Brand : DOALL • Model : DOALL 1 USED VERTICAL SAW [...]
Saw : KASTO TEC AC4
• Brand : KASTO • Model : KASTO TEC AC4 1 USED SAW KASTO Tec AC4 Year 2007 Diam. Maxi Sawing : 430 Power Motor : 23 KWA Equipments 1 Automatic [...]
Saw : FORTE 250
• Stock number : 5674 • Brand : FORTE • Model : FORTE 250
Saws accessories
Available in 2 or 3 mm hex wrench, sawblade of 14 teeth, ST37, V2A, non-ferro, metal plate up to 1 mm. Flat, round model or triangle file.
Portable saw - WAL-ZER 1
TECHNICAL FEATURES - CUTTING CAPACITY Easy to use. No coolant liquid required. High level machining and finishing of the parts. Electronic blade speed variator. Blade-guide [...]
Saw : FORTE 250
• Stock number : 5675 • Brand : FORTE • Model : FORTE 250
Saw : KASTO
• Brand : KASTO • Model : KASTO USED ALTERNATIVE SAW Diameter 250 Equipments Automatic feed works and lowering Counting and deducting of parts Stock [...]
Double head sawing machines MOXIE
Double head sawing machine with Ø 400mm blade and manual (Moxie) or motorized (Moxie M) cutting angle control.Tungsten carbide Ø 400mm saw bladesCutting angles: rotation from [...]
Double head sawing machine with Ø 400mm blade.
Glazing beads sawing machines TR_65N
They can in fact cut 2 glazing beads at a time and their stability during cutting is ensured by 4 independent vertical clamps that block the profiles both to the right and the [...]
Double head sawing machines BLIZ ALVA 500 M
Cutting angle from 22.5° outwards to 90° by pneumatic cylinders, with mechanical stops for intermediate angles2 tungsten carbide Æ 500 saw bladesHole ø 32 with reduction [...]
Double head sawing machine with pneumatic cutting angle control.
Single head sawing machines PANDA 400
Tungsten carbide Ø 400mm saw bladeCutting angle from 0° Rh to 0° LhOleopneumatic advance of tungsten carbide blade (adjustable blade exit speed - quick [...]
Single head sawing machine with Ø 400mm up-feed blade and manual positioning of vertical axis.
Single head sawing machines SIKA PLUS
Available versions: pneumatic blade down-feed and (pneumatic) vicesmanual blade down-feed and pneumatic vicesTungsten carbide Ø 400 mm saw bladeCutting angle: rotation from [...]
Single head sawing machine with Ø 400mm down-feed blade and manual cutting angle.
Single head sawing machines SIKA 350
Available versions: pneumatic blade down-feed and (pneumatic) vicesmanual blade down-feed and pneumatic vicesmanual blade down-feed and (manual) vicesTungsten carbide Ø 350 [...]
Single head sawing machine with Ø 350mm down-feed blade and manual cutting angle.
Doube head sawing machines TR_152 / TR_152E
This cutting-off machine is specifically designed for cutting PVC profilesBecause it features ø 550 mm blades and has 4 vertical clamps and 1 horizontal clamp on both [...]
Electronic cutting-off machine with two ascending blade heads
Double head sawing BLIZ ALVA 450
Tungsten carbide Ø 500mm saw blades (Ø 450mm - Blitz Alva 450)Cutting angles from 22.5° outwards to 90°Working cut 4000, 5000 or 6000 mm (can be increased with dedicated [...]
Double head sawing machine with ø 450 blade and electro-pneumatic cutting angle control
Single head sawing machines PANDA 300
Tungsten carbide Ø 300 mm saw bladeCutting angle from 0°Rh to 0° LhOleopneumatic advance of tungsten carbide blade (adjustable blade exit speed - quick return) or manualCutting [...]
Single head sawing machine with Ø 300mm up-feed blade and manual positioning of vertical axis
Table for cutting machines: TK 801 E
Powered displacement managed by a measure electronic positioner. Two legs table provided with rollers, precision guide - carriage with rack and encoder. Combinable with [...]
Table for cutting machines: TK 801 D
Manual displacement of the measure stop by means of a hand-wheel with pneumatic lock. Two legs table provided with rollers, precision guide - carriage with rack and [...]
RH Side Table For Cutting Machines: TK 802 M
Manual displacement of the measure stop by means of a hand-wheel and the size required can be read through the lens on the millimetered band. Combinable with any model of [...]
Single head machines: TK 113 A
Low-weight. Simple use. The rotation of the working head allows 90° and 45° cuts (right and left) and intermediate angles. Tilting range from 0° to [...]
90° cuts.
RH and LH angle cuts.
Cuts with tilted head - capability to get the combinations necessary for the obtainment of composite cuts.
Profile locking system.
Single head machines: TK 100
Manual cutting machine for small workshop or sites. Considerable cutting capacity. For all cuts between 45° / 90° / -45°. Simple use. Suitable also for [...]
Bench rotation to ensure bars.
Profile locking system.
Optional: Base rotation to keep the bars aligned.
Single head machines: TK 101 M
Manually operated blade upstroke. Considerable cutting capacity. For all cuts between 22°30' / 90° / -25°. Spray lubrication. Vertical clamps [...]
Mechanical stops of the rotating table on 45°/90°/-45° and trimming position.
Possibility to move backwards the vertical support level to increase the cutting and [...]
Single head machines: TK 101 A
Oleo-pneumatic blade upstroke. Considerable cutting capacity. For all cuts between 22°30' / 90° / -25°. Spray lubrication. Vertical clamps complete with a [...]
Mechanical stops of the rotating table on 45°/90°/-45° and trimming position.
Possibility to move backwards the vertical support level to increase the cutting and [...]
Single head machines: TK 138
Blade dia 600 mm to get very good cutting capabilities. Oleo-pneumatic blade upstroke. Spray lubrication. Full protection with complete cover and front automatic [...]
It cuts at 90°. If associated to a pusher it can execute in-sequence cuts.
Single head machines: TK 137
Blade dia 600 mm to get very good cutting capabilities. Oleo-pneumatic blade upstroke. Spray lubrication. Full protection with complete cover and front automatic [...]
For all cuts between 20°/90°/-20°.
Single head machines: TK 133 E
Blade dia 500 mm to get very good cutting capabilities. Strong cast iron head. Double pneumatic tilting of the head from -45° / 90° / 22°30' . Display [...]
Automatic drop of the blade protection.
Goniometer for governing intermediate angles.
Pneumatic tilting of the head from -45° / 90° / 22°30'.
Single head machines: TK 123 P
Blade dia 500 mm to get very good cutting capabilities. Strong cast iron head. Double pneumatic tilting of the head from -45° / 90° / 22°30' . Manual blade [...]
Adjustable blade protection.
Goniometer for governing intermediate angles.
Pneumatic tilting of the head from -45° / 90° / 22°30'.
Safety during the rotation of the head [...]
Single head machines: TK 133
Blade dia 500 mm to get very good cutting capabilities. Full protection with complete cover and front automatic lowering closure. Strong cast iron head. Double [...]
Full enclosure to provide noise reduction and complete accident protection.
Opening upper protection.
Goniometer for governing intermediate angles.
Pneumatic tilting of the [...]
Semi-Automatic Single-Head Cutting Machine: TK 133 CNC
Blade dia 500 mm to get very good cutting capabilities. Full protection with complete cover and front automatic lowering closure. Strong cast iron head. Head [...]
Full enclosure to provide noise reduction and complete accident protection.
Opening upper protection.
Electronic tilting of the head from -45° / 90° / 22°30'.
Electronic [...]
Double mitre saw : TK 145/M
Exceptional double mitre saw. Special fabricated and welded steel bed frame with finish machined, complete with slideways for the mobile head. Pneumatic head tilting [...]
Head tilting from 22° 30' to 90°.
Wide goniometre for intermediate degrees.
Clamps complete with high/low pressure safety device.
Safety during the rotation of the head [...]
Double mitre saw: TK 145/15 CNC GOLD
Exceptional double mitre saw. Special fabricated and welded steel bed frame with finish machined, complete with slideways for the mobile head. Double head tilting from [...]
Double head tilting from 22° 30' / 90° / -45°
Patented vertical clamps
Chips ejection through the head
Clamps complete with high/low pressure safety device
Chips chute
Double mitre saw: TK 145/12 WIN
Special fabricated and welded steel bed frame with finish machined, complete with slideways for the mobile head. Pneumatic head tilting from 22° 30' to [...]
Head tilting from 22° 30' to 90°.
Safety device to avoid crushes between head and mullion.
Wide goniometre for intermediate degrees.
Chips ejection through the head. [...]
Double mitre saw : TK 145/12 GOLD
Exceptional double mitre saw. Special fabricated and welded steel bed frame with finish machined, complete with slideways for the mobile head. Pneumatic head tilting [...]
Head tilting from 22° 30' to 90°.
Safety device to avoid crushes between head and mullion.
Wide goniometre for intermediate degrees.
Chips ejection through the head. [...]
Double mitre saw: TK 145/10 GOLD
Exceptional double mitre saw. Special fabricated and welded steel bed frame with finish machined, complete with slideways for the mobile head. Pneumatic head tilting [...]
Head tilting from 22° 30' to 90°.
Safety device to avoid crushes between head and mullion.
Wide goniometre for intermediate degreesChips ejection through the head.
Clamps [...]
Tips for circular saws
We produce saw tips for circular saws. In order to work soft, hard, exotic wood and other materials, CERATIZIT has created a wide range of grades. The grade is adapted [...]
Top Products














































