Press-In Devices 25 -100 kN with press-in force control and interpretation of the press-in process.

Press-in devices as bench devices with pressin force control and interpretation of the pressin operation are complete functional units and consist of 3 basic components: mechanical press-in frame, electro-hydraulic control and underframe for tables.

Above the table plate there are - according to the application of ergonomic design rules - the mechanical pressin frame with the data input board for the process parameters and the indicator board.

The two-hand operating panel is mounted to the exterior table frame. The electric control box and the hydraulic power unit are installed in the lower table area. Due to safety reasons, operation of the hydraulic cylinder is always made by a two-hand safety control.

Application:

Press-in devices for assembly with press-in force control and quality assurance of the press-in operation are preferably used in assembly processes for production of longitudinal pressed joints; in addition perfect press fit of frictionally-engaged joinings is guaranteed.

Quality assurance and the proof of realisation of longitudinal pressed joints are more and more demanded due to product liability and in accordance with ISO 9000. Due to their geometrical and simple shape it is normally cheaper to produce frictionally engaged assemblies than positive assemblies.