Glazing beads sawing machines TR_65N
They can in fact cut 2 glazing beads at a time and their stability during cutting is ensured by 4 independent vertical clamps that block the profiles both to the right and the left of the cutting point. Their position is adjustable. Cutting is done by means of 2 x dia. 250 mm blades while the milling of the fastening foot is done by another two dia. 155 mm coaxial blades. Both models can be connected to the locator stop mod. KIT_16DX featuring metric rule and two removable gauges, one 1650 mm and the other 3000 mm. Support KIT_16SX is also available to be positioned to the left of the machine and which can be fastened to the floor to support the glazing bead on the loading side as well. Speed is adjustable.