Pressure sensors
Manufacturers' and suppliers' offers for «Pressure sensors» . Compare offers for «Pressure sensors» and ask for a quote online.
Offers to 1 of 50 sur 58
Process and immersion sensor Turbimax CUS51D
Turbimax CUS51D is a process and immersion sensor for the measurement of low, middle and high turbidities and solids content. It is based on the Memosens protocol.
Process pressure Ceraphant T PTC31,PTP31
Process pressure. Pressure switch for safe measurement and monitoring of absolute and gauge pressures.
Pressure sensors with increased media compatibility
HMA Amplified pressure sensors with increased media compatibility; 0.5...4.5 V output; range from 100 mbar to 10 bar and from 1 to 150 psi; differential and gage [...]
Digital output pressure sensor
FEATURES - 0...1 to 0...100 psi and 0...±1 to 0...±100 psi - Digital output via I²C-bus - Precision ASIC conditioning - Temperature compensated - Non-ratiometric output [...]
Amplified pressure sensor
FEATURES Pressure ranges from 2.5 to 75 mbar differential or gage Also suitable for volumetric flow measurement Output: 0.25...4.25 V, I²C-bus (SPI and [...]
Sensortechnics’ HCLA pressure sensors offer precision ultra-low pressure measurement in ranges from 2.5 mbar. The HCLA series utilises the latest ASIC technologies to offer high [...]
DIFFERENTIAL PRESSURE TRANSDUCER
This series is specially developed for the measure of the differential pressures gas / gas where liquid / liquid. These versions admit very high pressures of line up to 500 bars, [...]
The series of sensors BP was specially developed for the measure of very low
The series of sensors BP was specially developed for the measure of very low(weak) dynamic and static pressure ( absolute or relative pressure) .Les 8 ranges of measure 0-5 mB in [...]
Barometric pressure sensor
FEATURES 600...1100 mbar, 800...1100 mbar barometric ranges utput: 0.25...4.25 V, I²C bus (SPI and switching output optional) Precision ASIC [...]
Sensortechnics’ HCA Baro series offers precision barometric pressure measurement with simultaneous I²C bus and analog output signals. The pressure sensors perform precision [...]
Pressure transmitter for corrosive media
FEATURES 0...-1 to 0...350 bar, 0...-15 to 0...5000 psi Absolute or gage pressure Also suitable for liquid level measurement Flush mount [...]
LDE: New digital ultra-low pressure sensors from 25 Pa offer very high offset stability and accuracy
First Sensor presents the new Sensortechnics LDE ultra-low pressure sensors with ranges from 25 Pa (0.25 mbar) full scale. The digital sensors use a special compensation [...]
The LDE sensors for air and gases are based on a very sensitive thermal mass flow measuring principle and provide high-resolution signals. The innovative Sensortechnics technology [...]
New Stainless Steel OEM Pressure Sensors Offer High Accuracy Over a Wide Temperature Range and Digital Outputs
Sensortechnics’ new SSI stainless steel OEM pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. These devices offer excellent [...]
Important features of the SSI series are:
- Pressure ranges from 200 mbar up to 35 bar gage or absolute
- Total Error Band (TEB) better than ±1.5 %FSS from -20…+85 °C
- [...]
Cost Effective Stainless Steel OEM Pressure Sensors Offer Ranges from 200 mbar and G 1/8 Threaded Ports
Sensortechnics’ new SSO stainless steel pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. Fully welded, media isolated rugged [...]
Important features of the SSO series are:
- Pressure ranges from 200 mbar up to 35 bar gage or absolute
- Calibrated and temperature compensated
- Fully welded, media [...]
New and Innovative Sensor Technology Offers Unmatched Sensitivity for Differential Low Pressure Measurement
Sensortechnics’ new LBA series offers differential low pressure measurement with ranges of 250 and 500 Pa Full Scale. The LBA sensors perform fully analog on-chip CMOS signal [...]
Important features of the new LBA series are:
- Pressure ranges of 250 and 500 Pa Full Scale
- Fully analog signal conditioning allows for very high resolution
- High [...]
Customized pressure sensors
Customized pressure sensors from Sensortechnics are devices which do not exist until a customer ask for a specification our standard sensors don't offer. Although one might [...]
Compact Pressure Switches Serie 9000
FeaturesCompact pressure switch, 1 switching contact, G1/4 female threadApplicationsOEM-applications, mobile and industrial hydraulics, test bed and apparatus engineering, heavy [...]
Compact Pressure Switches Serie 8000
FeaturesCompact pressure switch, with diaphragm or piston sensing element, 1 switching contact, the successor of the product lines XTM, XTK and X1TApplicationsMachine-tool [...]
Compact Pressure Switches KLM
FeaturesMini Pressure Switch,1 switching contact,Compact construction,Factory sets switch contactApplicationsMobile hydraulics, Motor-control, Hydraulic [...]
Compact Pressure Switches KLM
FeaturesMini Pressure Switch,1 switching contact,Compact construction,Factory sets switch contactApplicationsMobile hydraulics, Motor-control, Hydraulic [...]
Compact Pressure Switches KD1
FeaturesMini Pressure Switch,1 switching contact,Compact construction,Factoy set switch contactApplicationsMobile hydraulics, Brake system control, Hydraulic accumulator [...]
Compact Pressure Switches 9671X
FeaturesCompact pressure switch,Flameproof enclosure acc. ATEX,Safe to adjust during operation via adjustment wheel,Tamper resisting cover,1 Switching contact [...]
Compact Pressure Switches 9681X
FeaturesCompact pressure switch,Flameproof enclosure acc. ATEX,Safe to adjust during operation via adjustment wheel,Tamper resisting cover,1 Switching contact [...]
Differential pressure display : TP
Adjustable differential pressure transmitter for motoring the differential pressure of the air. Applications : Monitoring air fi lters and fans.
Pressure Transmitters: P9420-800
A further development in the range of Hammer-Lug Union fitting Pressure Transmitters, this extension of the P9420 eries offers fused ceramic sensors, highshock and vibration [...]
DS-1-A-400-1/4" for serv-Clip
In addition to its robust and compact design, this sensor stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed [...]
Pressure sensor DS-1-A-400- 1/4" or 3/4" fluid-Check ®
with serv-Clip Type 1 or Type 2
Pressure monitoring : Vacuum switch
- Low-cost switch with high SUCO standard of quality.- Switching point easy to adjust.- High overpressure resistance and long working life even under harsh operating conditions.- [...]
Pressure monitoring : Pressure transmitters
- Wetted parts are all made of stainless steel for high resistance to chemicals- Stainless steel diaphragm welded with casing- No seals and thus low leakage rate even with [...]
Atmospheric pressure sensor
Sensor: Stainless Steel Capsule and Straingauge with built-in lineariserRange :850 - 1050 mb (Heeta Pascal)Resolution : 0,1 mb (Heeta Pascal)Output : 1 - 4 volts (0 - 5 volts [...]
FCX-C
FCX-C series are available for differential gauge and absolute pressure, and offer measuring ranges from 60 mmWC to 100 bar.The compact size and weight of the gauge and absolute [...]
Pressure Transmitters FCX-A
FCX-A series are available for differential, gauge and absolute pressure, liquid level, and offer measuring ranges from 10mmWC to 500bar.Thanks to their experience of [...]
QRA
Flame detectors for use with burner controls from Siemens Building Technologies for the supervision of gas or oil flames
QRI
Infrared flame detectors for use with Siemens burner controls, for the supervision of gas, oil and other flames that emit infrared light. The QRI... are suited for burners [...]
7MF Pressure Sensor
Pressure sensor with range of 0-15psi through 0-300psi Output options 4-20mA & 0-10v High measuring accuracy, 0.25% of full scale typical Aggressive and [...]
Aircraft Mechanical Systems
A major challenge facing engineers designing aerospace mechanical systems is to increase functionality while reducing weight and improving reliability. The interaction between [...]
Getting mechanical systems right first time.
Aircraft Engines
Today’s engine designers need to manage the conflicting goals: increasing performance while reducing fuel consumption and noise. To meet these challenges, engine designers need [...]
Aircraft structures
Airframe manufacturers are continuously creating innovative designs, making greater use of new lightweight materials and increasing their focus on passenger comfort. Achieving a [...]
Designing tomorrow's aircraft structures.
PRiME current transducers
PRiME operates on the basic Rogowski principle, where a coil is magnetically coupled with the flux created by the current to be measured. A voltage signal is induced [...]
Hall effect current transducers (O/L)
The magnetic flux created by the primary current IP is concentrated in a magnetic circuit and measured in the air gap using a Hall device. The output from the Hall device is then [...]
Precision Barometic Indicator - DPI142
The DPI 142 is a high accuracy barometric indicator with digital communications suitable for integration into any datalogging or integrated information system. It provides highly [...]
Precision Pressure Indicator - DPI 150
The DPI 150 provides an accurate yet economical digital pressure indicator. It is available in various pressure ranges from as low as 0 to 10 inH2O up to 3000 psi (25 mbar to 200 [...]
Tire Pressure Sensors
Tire Pressure Sensors with Acceleration and Integrated PressureThe Infineon SP3x (SP30/35) family of TPMS pressure sensors combines a silicon micro-machined pressure and [...]
Barometric Air Pressure Sensors (BAP)
The barometric air pressure (BAP) is an important parameter to compute the air-fuel ratio provided to the engine and for controlling spark advance to optimize engine efficiency. [...]
Integrated Pressure Sensor IC for Manifold Air Pressure Measurement Applications
Application:The manifold air pressure (MAP) is an important parameter to compute the airfuel ratio provided to the engine for lower emission due to better combustion and increased [...]
Pressure transducer UPA2
For general pressure measurment applications, with internal or flush stainless steel diaphragm sanitary type, also available, accuracy class 0,5% and 0,25% f. s.Electronic pressue [...]
CMI Can-open module interface for non-amplified transducers
The CAN OPEN module interface for non-amplified transducers has been developed to acquire low level signals from strain gage bridges (load cells, pressure transducers) and to [...]
TPFADA flush diaphragm Pressure Transmitter with digital Autozero & Span
TPFADA Series flush diaphragm pressure transmitters are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 PH [...]
TPSADA Digital autozero & span option
Digital “Autozero & Span” option makes the pressure transmitter TPSA Series a product extremely innovative and versatile. Designed thanks to the advanced electronics used [...]
TKDA Digital autozero & span option
Digital “Autozero & Span” option makes the pressure transmitter TK Series a product extremely innovative and versatile. Designed thanks to the advanced electronics used by [...]
XSA Pressure transmitters for applications in hazardous areas
The XSA transducers are based on the piezoresistive measurement principle. The mechanical structure makes the transducer insensitive during the tightening phase. This transducer [...]
Top Products
