Safety switch PSEN for safety gate and position monitoring :

• Non-contact, magnetic safety switches PSENmag
  Non-contact, magnetic safety switches are used to monitor the position of movable guards and also for general position monitoring. PSENmag switches can be used in applications in which the risk analysis specifies a high category, where there is heavy soiling and where strict hygiene regulations need to be met. In applications in which it is difficult to align the gates accurately, where machine gates are subject to a high level of vibration and where large tolerances are required on start up - PSENmag switches are the right choice.
• Non-contact, coded safety switches PSENcode
  With PSENcode, protection against manipulation is built into the switch:
  The safety switch and actuator work together in such a way that the enable from the safety device is only triggered if the actuating element is within the switch’s response range and the code number on the actuator matches that of the switch. Two versions of this key lock principle are available: for use with any actuator or with an actuator that is uniquely assigned to the PSENcode.
   So PSENcode non-contact, coded safety switches are suitable for safe monitoring of a movable guard. If the guards are opened, the PSENcode safety switches are triggered and the hazardous machine movement is stopped via the Pilz evaluation device. So you have a complete solution that's safe and approved, all from the one source.
• Mechanical safety switch PSENmech
  PSENmech mechanical safety switches are suitable for safe monitoring of a movable guard.
  Using increased extraction force on the actuator, PSENmech safety switches prevent the safety gate from being opened unintentionally. They comply with the standard EN 1088 (protection against defeat) due to their mechanically-coded actuators.
• Safe hinge switches PSENhinge
  Safe hinge switches are a safe, complete solution for hinged safeguards, comprising a hinge and a safety switch. Designed as one functional unit, they offer a high level of flexibility in installation, connection and adjustment. Safe hinge switches PSENhinge allow the systems to be attached to the right or left for an optimum cable feed. Designed for front or inside installation, the rotation angle can be set between 0° to 270°.