Manufacturers, suppliers, industry products - industry trade fair
  Industrial suppliers   > OTEC > Our product range 
OTEC

Otec

OTEC is a specialist of deburring, grinding, smoothing, and polishing surfaces with maximum speed and efficiency. 



Offers 1 to 20 of 53

Flexible abrasives 

View bigger picture
Mikrofinish-Schleifkörper: Microfinishing media KXMA
Contact OTEC

Mikrofinish-Schleifkörper: Microfinishing media KXMA

Fine-grained abrasive made from sintered ceramic. Very high density. Especially suitable for fine grinding and polishing of hardened steel. Highly wear resistant. Very good for [...]
View bigger picture
Microfinishing media KXMA: HSC Granulate
Contact OTEC

Microfinishing media KXMA: HSC Granulate

Especially suitable for processing of HSS- and carbide tools. It is also very good for polishing of coatings and removal of droplets. Precision edge honing of carbide tools [...]
View bigger picture
Mikrofinish-Schleifkörper: QZ Granulate
Contact OTEC

Mikrofinish-Schleifkörper: QZ Granulate

Especially suitable for edge roundings larger than 30 µm at cutting tools. White corundum in following sizes: 0.5 mm; 1 to 2 mm; 1 to 3 mm  
View bigger picture
Plastic grinding chips
Contact OTEC

Plastic grinding chips

These high quality grinding chips offer high stock removal rates and a fine surface finish. Their soft bond prevents any hardening or pitting of the workpiece surface.  

Additives for paint 

View bigger picture
HL6 grinding oil
Contact OTEC

HL6 grinding oil

Serves as an adhesive when using grinding and polishing powder or as a lubricating additive to prevent the granulate from drying out during dry polishing. In addition it binds [...]
Up

Balls 

View bigger picture
Zirconium oxide balls G-ZY
Contact OTEC

Zirconium oxide balls G-ZY

Very hard and therefore long-lasting. Very good polishing properties. Highly recommended for use in vibrators (in the jewellery industry).  
View bigger picture
Stainless steel media
Contact OTEC

Stainless steel media

Stainless steel ballsin the diameters 2.4; 3.2 and 4.0 mm.Other sizes on request.Material: 1.4301 = AISI 304, AISI 420Satellitesin the sizes SAT 3/5.Other sizes on [...]

Degreasing, Lubrifying  

View bigger picture
UC 12 Ultrasonic Cleaning Compound
Contact OTEC

UC 12 Ultrasonic Cleaning Compound

UC 12 Ultrasonic Cleaning Compound for Ultrasonic Cleaning UnitsThe new ultrasonic cleaning compound UC12 from OTEC is, due to its special composition, very well suited for many [...]

Hydraulic filters 

View bigger picture
Microfiltration systems: MF series
Contact OTEC

Microfiltration systems: MF series

 The advantages of the MF series:- Extremely efficient system filters out all solids ?0.2µm, enabling the water/compound mixture to be recycled between the finishing unit [...]

Deburrers 

View bigger picture
Disc finishing units/CF Series: CF-T Series
Contact OTEC

Disc finishing units/CF Series: CF-T Series

The machines of the CF-T series are high-performance disc finishing units in benchtop design. They all offer the design benefits of the globally successful CF series. The CF-T [...]
Up
View bigger picture
Disc finishing units/CF Series: CF OIL Series
Contact OTEC

Disc finishing units/CF Series: CF OIL Series

This series has been specifically designed for use with special grinding and polishing abrasives in combination with oil instead of a water/compound mixture. They are especially [...]
View bigger picture
Disc finishing units/CF Series: CF MR Series
Contact OTEC

Disc finishing units/CF Series: CF MR Series

Flange-mounted separator unit with vibration motors and automatic media returnWhen the process container is emptied, the workpieces are automatically separated from the media.The [...]
View bigger picture
Disc finishing units/ECO Series: ECO-Maxi Wet Series
Contact OTEC

Disc finishing units/ECO Series: ECO-Maxi Wet Series

This machine is designed exclusively for wet grinding and wet polishing applications.This is achieved after about 3 - 4 hours:- Complete removal of sanding marks and casting skin- [...]
View bigger picture
Disc finishing units/ECO Series: ECO-Maxi Dry Series
Contact OTEC

Disc finishing units/ECO Series: ECO-Maxi Dry Series

This machine is designed exclusively for dry grinding and dry polishing applications.This produces:-  Very smooth surfaces-  Brilliant shine, comparable with hand [...]
View bigger picture
Disc finishing units/ECO Series: ECO 9/18 Series
Contact OTEC

Disc finishing units/ECO Series: ECO 9/18 Series

This machine is designed exclusively for wet grinding and wet polishing applications.  Ideal for deburring turned and milled parts as a stand-alone solution right next to the [...]
Up
View bigger picture
DF-6 Automation
Contact OTEC

DF-6 Automation

The DF-6 Automation is a fully automatic drag finishing machine for the deburring, edge-rounding and polishing of cutting tools. The workpieces are loaded and unloaded by means of [...]
View bigger picture
CF 50 Disc Finishing Machine with automatic granulate return
Contact OTEC

CF 50 Disc Finishing Machine with automatic granulate return

A CF 50 machine with zero gap system was integrated into an existing fully automatic installation.The requirements were as follows:- Integrate into existing space- Integrate into [...]

Emerising machines 

View bigger picture
Disc finishing units/CF Series: CF Standard Series
Contact OTEC

Disc finishing units/CF Series: CF Standard Series

The CF machines are available in a jewelry version and an industrial version. The difference resides for example in the control unit. For the industrial version the Siemens S [...]
View bigger picture
Disc finishing units/ECO Series: ECO-mini Wet Series
Contact OTEC

Disc finishing units/ECO Series: ECO-mini Wet Series

Mini-sized wet grinding machine for cleaning and grinding jewelry. Especially suitable for removing casting skin.  
View bigger picture
Disc finishing units: EF Series
Contact OTEC

Disc finishing units: EF Series

Machines in the EF series are high-performance units which are very easy to operate. They use a patented gap adjustment system to make adjusting the gap faster and easier. [...]

Top Products

Lumaphore 440

Top categories

Materials for production of mechanical components Radio frequency measurement Thickness measurements Laser marking Products for the chemical treatment of surfaces IT equipment Gelcoat Industrial ovens Rental of modular buildings Fire fighting Hydraulic presses
Open your online booth in less than 1 hour - click here
A brand of InfoPro Communications