Molds, Forging dies, Accessories
Manufacturers' and suppliers' offers for «Molds, Forging dies, Accessories» . Compare offers for «Molds, Forging dies, Accessories» and ask for a quote online.
-
Accessories
(123) -
Forging dies
(6)
-
Molds
(9)
Offers to 1 of 50 sur 138
Gun holders GH10,20,30
A series of gun holders for increasing the operating life of welding guns. Can be mounted on a welding machine, transport unit, or welding table.
KLIKSO stopper KLIKSO range - DN 90 to 160
Ductile cast iron fittings for pressure PVC / PE tubes : KLIKSO range KLIKSO stopper. Ductile cast iron fittings for pressure PVC or PE tubes in compliance with standards:- [...]
Ref. CE - BOLT AND NUT PROTECTION CAPS
BOLT AND NUT PROTECTION CAPS CE are intended for hexagon shapedBolt and nut protection capsProtect against weathering and tampering Enhance finished [...]
Minimum order quantity for any colours: 1000 pieces
Elastomer bellows
Whether you need a one-off part or an entire production run, our elastomer bellows are manufactured from drawings at no additional tooling cost to you. All parts are designed and [...]
Paint-compatible bellows
RC Modèles paint-compatible bellows were developed in response to customer specifications. Both the materials and manufacturing process are guaranteed free from silicone and [...]
Harness protectors
Our harness protectors are made using an engineered fabric and are designed to protect electrical wiring, braided cables, shunt ducts, and hydraulic hoses to protect them from [...]
Telescopic shields
Our telescopic shields are made from a high-tensile steel for a uniform, flat surface and a long lifetime. Our shields can be designed to replace your existing model, [...]
Cold heading dies for screw and mass part production
Cold heading nibs as blanks or semi finished products as well as finished cold heading dies from one source – CERATIZIT customers do appreciate the advantage and the [...]
VERTICAL MOULDING DISAMATIC 2110
The vertical moulding machine is the right choice for production of very close tolerance castings. Often the only competitive way. DISAMATIC 2110 standard features [...]
VERTICAL MOULDING DISA 130
The DISA 130 was launched in the beginning of 2006 and it makes DISA's latest technology affordable for foundries looking for medium capacity output of precision [...]
VERTICAL MOULDING DISA 240
Production capacity: up to 450 moulds/hour (uncored) Mismatch of 0.15 mm or less Superior uptime with fewer moving parts, more rigid design and reduced [...]
VERTICAL MOULDING DISA 250
Production capacity: up to 450 moulds/hour (uncored) Mismatch of 0.15 mm or less Superior uptime with fewer moving parts, more rigid design and reduced maintenance and [...]
VERTICAL MOULDING DISA 270
Production capacity: up to 400 moulds/hour (uncored)Mismatch of 0.2 mm or lessSuperior uptime with fewer moving parts, more rigid design and reduced maintenance and parts [...]
VERTICAL MOULDING DISA 280
Production capacity: up to 300 moulds/hour (uncored).Mismatch of 0.25 mm or less.Superior uptime with fewer moving parts, more rigid design and reduced maintenance and parts [...]
HORIZONTAL MOULDING DISA Flex 70
The DISA FLEX 70 horizontal flask moulding machine is characterised by a double-air blow and hydraulic squeeze mould compaction system. Combining the advantage of the [...]
Assembly kit 33, flush fitting version
Flush-fitting version: For flush-fitting installation in the built-in version with an attractive transition from the knob to the front of the device. Suitable for knob diameter [...]
Marking tool M 1
The marking tool allows you to quickly and safely mark the joint insertion depth on pipes ranging from 12 to 108 mm. The marking can be checked for the correct insertion [...]
Installation aid
The installation aid makes positioning of pipe and fitting easier. A quick and clean installation is the result. Light weight - easy to handle and simple to use. Designed [...]
Pipe deburring tool RE 1
Deburrs steel, stainless-steel and copper pipes quickly and cleanly, inside and out. Light weight - easy to handle and simple to use. Designed for dimensions starting at 12 [...]
Coolant Tubes
– Prevents spindle from being spoiled– Must be used with all coolant through HSK spindles– Dual o-ring design makes tube slightly movable– Special coating with extremely [...]
Sawblade holder
Use: For holding sawblades on Weldon toolholdersDesign of shank according to DIN 1835-B well quenched and tempered, internally and externally ground– Included in delivery: [...]
Pull Stud
Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high.Pull studs of minor quality not [...]
Accessories for Safety Components : 363098
Interface for control units 462 12. G1./462 121 E1./H1./463 12. ..
Collet chuck ER: DIN 69882-6
Use: For clamping tools with cylindrical shank in ER collets.– Included in delivery: locknut (balanced, with slide coating for higher clamping forces); without coolant [...]
Combination shell end mill arbor: DIN 69882-2
Use: For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830 – Comprising: Tightening bolt, driving ring and [...]
Shrink Fit Chuck: DIN 69893
Use: Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without coolant tube– Heat [...]
Shrink Fit Chuck
Use: Suitable for all shrinking units.– Heat resistant hot-working steel– Hardened 54-2 HRC– For HSS and solid carbide tools– Shank tolerance h6– Cooling with Cool [...]
Collet chuck ER: DIN 69882-6
Use: For clamping tools with cylindrical shank in ER collets.– Included in delivery: locknut (balanced, with slide coating for higher clamping forces); without coolant [...]
Shrink Fit Chuck: DIN 69893
Use: Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without coolant tube– Heat [...]
Quick change tapping chucks
Use: For tapping preferably on NC milling machinesAdvantages: – axial length compensation– interior high-pressure cooling up to 50 bar– newly developped adapter [...]
Blank adapter
Use: For manufacturing special tools in your factoryDesign: HSK is hardened and ground, the cylindrical part is [...]
Whistle Notch toolholder: DIN 69882-5
Use: For clamping cutters with cylindrical shank and inclined flat according to DIN 1835-E and DIN 6535-HE– Comprising: Clamping screw and adjustment bolt, without coolant [...]
Power Collet Chuck
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity [...]
Mini Shrink extra slim
– Extreme slim design– No disturbing edges– Highest runout accuracy: 3 µm– Also jobs difficult to access are penetrable– Optimum rigidity– Ideal to shrink [...]
Power Shrink Chuck: DIN 69893
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening [...]
The long versions (A =130 and 160) with slim tips are especially versatile to use.
Shrink Fit Chuck: DIN 69893
Use: Suitable for all shrinking units.– Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without coolant tube– Heat [...]
Combination shell end mill arbor: DIN 69882-2
Use: For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830– Comprising: Tightening bolt, driving ring and [...]
Collet chuck ER: DIN 69882-6
Use: For clamping tools with cylindrical shank in ER collets.– Included in delivery: locknut (balanced, with slide coating for higher clamping forces); without coolant [...]
Shrink Fit Chuck: DIN 69893
Use: Suitable for all shrinking units. – Fine-balancing by set screws possible– Included in delivery: Shrink fit chuck with backup screw, without coolant tube– [...]
Combination shell end mill arbor: JIS B 6339 BT 50 form ADB
Use: For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830similar to DIN 6358 with taperForm ADB means: central [...]
Shrink Fit Chuck: JIS B 6339 BT50 form ADB
Use: Suitable for all shrinking units.Form ADB means: central coolant supply and coolant channels through the flange which can be sealed again– Heat resistant hot-working [...]
Combination shell end mill arbor: JIS B 6339 BT 40 form ADB
Use: For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830similar to DIN 6358 with taperForm ADB means: central [...]
Collet chuck OZ: JIS B 6339 BT 40 form ADB
Use: For clamping tools with cylindrical shank in collets according to DIN 6388similar to DIN 6391 with taper Form ADB means: central coolant supply and coolant channels [...]
Weldon toolholder: JIS B 6339 BT 40 form ADB
Use: For clamping tools with cylindrical shank and Weldon flat.similar to DIN 6359 with taperForm ADB means: central coolant supply and coolant channels through the flange [...]
High-precision chuck: JIS B 6339 BT 40 form ADB
Use:For high-precise clamping of tools with cylindrical shank with special collets. Very useful for high-speed machiningwith taper JIS B 6339 BT 40 form ADB Form ADB [...]
Collet chuck ER: JIS B 6339 BT30
Use: For clamping tools with cylindrical shank in ER collets.– Included in delivery:locknut (balanced,with slide coating for higher clamping forces); locknut type HS [...]
Shrink Fit Chuck: JIS B 6339 BT30
Use: Suitable for all shrinking units.– Heat resistant hot-working steel– Hardened 54-2 HRC– For HSS and solid carbide tools– Shank tolerance h6– Included in [...]
