Industry fair   > MEWAG > Our product range 

Offers 1 to 15 of 15

Heating equipment 

View bigger picture
Tubes for gas heating
Contact MEWAG

Tubes for gas heating

- Fully automatic production line for   the bending of tubes having 1 to 20   bends - Tube material with lengths from   90 mm to 1000 mm - Loading [...]

Metal works machinery 

View bigger picture
Automatic bending of single bent parts
Contact MEWAG

Automatic bending of single bent parts

- Production line for the fully   automated bending of parts with   one bend. for tube material with ø   20 to ø 76 mm with end shape- Aspects: The [...]
View bigger picture
Tube bending DKB 42 U CNC
Contact MEWAG

Tube bending DKB 42 U CNC

- for tubes up to ø 42 mm - Bending at the same time 2 bends - Area of use: Copper rails for   generators  
View bigger picture
Formula 1
Contact MEWAG

Formula 1

- Machine for the bending of single   elbow bends with extreme tight   radius requirements.  
View bigger picture
Sanitary equipment bending machine
Contact MEWAG

Sanitary equipment bending machine

- Bending of fittings and Turned   parts - The special aspects are: No   corners on the fittings, controlled   tube wall thickness [...]
Up
View bigger picture
Production line for seat back supports
Contact MEWAG

Production line for seat back supports

- Manufacturing of seat back   supports for the automobile   industry. - Work steps Bending / pressing - Forming of the tube ends  

Woodworking machinery 

View bigger picture
Cutting / Bending
Contact MEWAG

Cutting / Bending

- In the revolving magazine 350   tubes having a length of 6 meters   are fed separately into the bending   machine. - The tubes are bent, cut to [...]

Cutting machines 

View bigger picture
Loading / Punching / Bending
Contact MEWAG

Loading / Punching / Bending

- A production line for the fully   automated production of bent and   punched parts- Tube material with a start length of   400 mm to 3000 mm - [...]

Machines for metal wire processing 

View bigger picture
Tube bending DKB 32 U CNC
Contact MEWAG

Tube bending DKB 32 U CNC

- for tubes up to ø 32 mm - Bending at the same time 2 bends - Area of use: Automobiles Seats   frames      

Special machines 

View bigger picture
Two bends at the same time
Contact MEWAG

Two bends at the same time

- Machine to bend simultaneously   two parts  
Up
View bigger picture
Airbag tubes
Contact MEWAG

Airbag tubes

- Production centre for the   manufacturing of air-bag tubes in   large amounts - Production steps: Bending / Hole   punching / End forming / [...]

Industrial handling sytems 

View bigger picture
Manual tube bender RB 15
Contact MEWAG

Manual tube bender RB 15

With this machines, copper, messing, steel, and stainless steel tubes can be easily and exactly cold formed without filling materials.This bender is mobile and can be firmly [...]

Industrial Robotics 

View bigger picture
Fully automated production line for door handles
Contact MEWAG

Fully automated production line for door handles

- Manufacturing of door handles   automatically- Full automated production during   8 hours without any presence or   assistance of the operator- Tube [...]
View bigger picture
Production using robots
Contact MEWAG

Production using robots

- Automatic production line for the   manufacturing of bent parts - Work Steps, Bending / Pressing   and foam insulation covering  

Industrial Robots 

View bigger picture
Command system for bending machine
Contact MEWAG

Command system for bending machine

With the MTC-XP controller generation, MEWAG offers an open automation system. The machines are equipped with powerful Beckhoff industrial PCs. Together with the TwinCat PLCS/NC [...]
Open your online booth in less than 1 hour - click here