Mechanic components
Manufacturers' and suppliers' offers for «Mechanic components» . Compare offers for «Mechanic components» and ask for a quote online.
-
Assembly systems and components
(278) -
Balls
(6) -
Bearings, Linear guides
(165) -
Compression spring
(7) -
Electric Motors
(20) -
Electric pumps
(15) -
Extension spring
(3) -
Flat spring
(1) -
Guide rails
(55) -
Joints, Coupling
(186) -
Lubrication
(22)
Offers to 251 of 300 sur 1 467
Servoslide®
Optimised frictional properties • Vibration damping • Largely stick-slip free • High finish accuracy • Small guide play
A wide range of qualities.
Servocop®
Optimised frictional properties • Stick-slip-free movement at very low and very high piston speeds • High finish accuracy • Small guide play
Servofloat®
Patented annular gap seal • Very low-friction cylinder movement• Non-contact pressure drop to the outside• Low leakage• High finish accuracy• Small guide play• No [...]
Servobear®
Patented annular gap seal • Very low-friction cylinder movement• Non-contact pressure drop to the outside• Low leakage• High finish accuracy• Small guide play• No [...]
Incremental encorders: FG40
- Compatible and easily interchangeableJOHANNES HÜBNER GIESSEN is a synonym for:- State of the art encoder and drive engineering solutions for heavy industry- Highest product [...]
the New Encoder Generation.
A further development of the proven FG4 series.
Incremental encorders: FG 4
The FG 4 optical incremental encoder is a mechanically and electrically robust and reliable unit for use under the harshest ambient conditions. Its features include:• Designed [...]
Incremental encorders: FGH 6
Optical hollow shaft encoders in the series FGH 6 – FGH 8 – FGH 14 with large bores. They are very robust and reliable in a sturdy alu-housings with reinforced ribs, suitable [...]
Incremental encorders: FGH 14
Optical hollow shaft encoders in the series FGH 6 – FGH 8 – FGH 14 with large bores. They are very robust and reliable in a sturdy alu-housings with reinforced ribs, suitable [...]
Incremental encorders: FGH 8
Optical hollow shaft encoders in the series FGH 6 – FGH 8 – FGH 14 with large bores. They are very robust and reliable in a sturdy alu-housings with reinforced ribs, suitable [...]
SKD/SBE
With special blocking mechanis:• re-engaging only by reverse rotation• with seperate sliding bearing (series SKD)• with bellow attachment (series SBE)• with conical [...]
SKB
With bearing arrange in tandem: • for maximum width toothed belt or gearwheels • for highest radial loading • dimensions on request
Special series
Customized hub versions and dimensions:• operating speeds up to 8.000 min-1• disengagement torques up to 3.000 Nm• special or stainless steel design• special re-engaging [...]
Roller chains
All standard roller chains undergo continuous quality assurance and quality inspection. Iwis chains are pre-stretched, have a highly effective initial lubrication and are [...]
Rotary unit DAP-2
The Rotary Drives DAP are distinguished by exceptionally high performance data and an extremely efficient operation. The low own weight results in high dynamic performance and [...]
Electrical parallel gripper GPE
Electrical parallel grippers GPE are electrically operated, moment-controlled grippers for internal and external gripping of parts. They are used wherever workpieces have to be [...]
Electrical rotary unit DAE-60
The electrical rotary drives are electrically operated, position-controlled rotary drives for executing regular, rotational forward and backward movements.The electrical rotary [...]
Lifting device HE-50
Designed as a compact and extremely stable unit for short, straight movements, the Lifting Unit HE is predominantly used at increased moment load.The ratio of extended to [...]
Transfer System LTE
The single-belt transfer system LTE from Montech is an asynchronous transfer system whose function is to automatically guide workpieces through the necessary workstations [...]
Servo horizontal axis SHA-340-400-LH
The Servo Horizontal Axis SHA-340 is an electrically operated, position-controlled linear unit which serves as the base unit in the construction of portal loaders. For example, [...]
Positioning Unit PVE for TB-250 complete
Positioning unit PVE is used when application of a high force to the workpiece has to be realized in addition to high positioning accuracy in assembly and processing operations [...]
Positioning Unit PVE for TBD-105 complete
Positioning unit PVE is used when application of a high force to the workpiece has to be realized in addition to high positioning accuracy in assembly and processing operations [...]
DC motors : Maxon A-max
• DC motors with ironless rotor.• 6 different motor sizes: Ø 12, 16, 19, 22, 26, 32 mm.• 0.5 - 20 watts.Characteristics : • High performance AlNiCo magnets.• Economical [...]
DC motors : Maxon RE-max
• DC motors with ironless rotor.• 5 different motor sizes: Ø 12, 16, 19, 22, 26, 32 mm.• 0.75 - 22 watts.Characteristics : • High performance AlNiCo magnets.• [...]
Maxon EC motors : EC-max
• Electronically commutated (brushless) DC motors. • 4 different motor sizes: Ø 16, 22, 30, 40 mm. • 5 - 120 watts. Characteristics : • Electronically commutated. • [...]
The modular drive system with an impressive price/performance ratio.
Maxon EC motors : 4 pole
• 4-pole brushless DC motors.• Ø 22 - 30 mm.• 90 - 200 watts.Characteristics : • Electronically commutated.• Neodymium magnets.• Robust design.• Unsurpassed service [...]
Ø 30mm, 200 watts: Brushless servomotors pushing the boundaries of technology
Clamping collets, SK
The clamping collets are connecting units between a shaft, e.g. an engine shaft or a ball-screw spindle shaft, and a motor drive shaft. The collet consists of [...]
Clamping collets, SZ
The clamping collets are connecting members between a shaft, e.g. an engine shaft or a spindle shaft, and a drive shaft. The collet consists of three parts and enables the [...]
Clamping cones, SP
The clamping cones are connecting members between a shaft, e.g. an engine shaft or a spindle shaft, and a drive shaft. The clamping cone consists of two parts and makes it [...]
Laminated shim
The priciple remains in inserting a chip within the shim's layers. Next, the chip is encoded with the shim's identity. From that moment on, the information [...]
Laminated Shim in
A unique patented LAMECO material made of a glycol polyethylene terephthalate film obtained by a slit-die extrusion process, followed by a double-drawing. Advantages : [...]
Laminated shim X.FIBER®*
This composite material comes in the form of woven fiber sheets, which can be manufactured in several different ways: glass, carbon, aramide, ceramic fibers or any combination of [...]
Silentline laminated shims
SILENTLINE is a composite of metal and synthetic material, which has the key advantage of spreading the vibrational energy over a dramatically wider band (lower Q factor) - [...]
Distancer
For 2 bars, 10 mm, in three parts, one side pre-mounted. Holder heads made of high-quality cast aluminium, distance pieces made of flat aluminium material, screws [...]
Expansion joints made of aluminium, with welded ends
- Construction : Sturdy connecting ends are welded (using inert gas) to a pack of thin plates. - Material : Thin plates made of electrolytic Al, i.e. Al 99.5, 0.3 mm thick, width [...]
Expansion joints made of copper, with welded ends
- Construction : Sturdy connecting ends are welded (using inert gas) to a pack of thin plates. - Material : Thin plates made of electrolytic Cu 0.2 mm thick, width 2 mm smaller [...]
Expansion joints made of copper, pressure-riveted
- Construction : Layers of copper foil are riveted and pressed to the connecting surfaces with cover plates. - Material : Thin plates made of [...]
Highly flexible connections made of copper fabric strip
- Construction : Under high pressure, copper fabric strips are pressed to the connecting surfaces with copper tubes.- Material : Fabric strips made of electrolytic CU single [...]
Highly flexible connections, made of copper round strand
- Construction: Under high pressure in the die, highly flexible copper strands are pressed to the connecting ends with cable lugs. - Material : Strands [...]
Connection and joining pieces made of copper fabric strip
- Construction : Our product brochures give extensive details of type, length and drill hole diameter. - Specially made types : Tin-covered strand, tin- or [...]
Connection and joining pieces made of copper round strand
- Construction : Highly flexible copper strands are pressed to the connecting ends with cable lugs. - Material : The standard types have strands made of electrolytic Cu with [...]
Busbar carriers : Line carriers type L
- Construction : For single bars and multiple bars, horizontal and/or vertical, with adjusting screw and intermediary piece. - Material : Cast aluminium, [...]
Busbar carriers : Line carriers Type LS-F / Type LS-G
- Construction : For single bars and multiple bars, vertical, for the carrying of bars in non-fixed state, with intermediary piece. - Material : Bottom [...]
Busbar carriers : Line carriers type LS-HD
- Construction : For single bars and twin bars, vertical, for the carrying of bars in non-fixed state, with intermediary piece. - Material : Bottom and [...]
Distancers
- Construction : For 2 bars, 10 mm, in three parts, one side pre-mounted. - Material : Holder heads made of high-quality cast aluminium, distance pieces [...]
Pressure plates
- Construction : Square pressure plate with central clearance hole, D 80 and D 100 with two lateral guides. - Material : High-strength heat-treated [...]
Engineered Bearings: Tilting Pad Bearings
Each John Crane bearing will be a customised solution for an individual application characterised through its operational features. To overcome stability problems experienced in [...]
Optimised Stability For High-Speed Applications.
Engineered Bearings: Tilting Pad Thrust Bearings
Tilting pad thrust bearings are generally used in high speed machinery operating under medium to high loads, eg turbines, pumps, turbocompressors and high speed gearboxes. They [...]
Automatic Adjustment To Varying Conditions.
Top Products
