Hand tools
Manufacturers' and suppliers' offers for «Hand tools» . Compare offers for «Hand tools» and ask for a quote online.
-
Clamping and tightening
(23) -
Cutting tools
(9) -
Deburring devices, Files
(1) -
Extractors
(5) -
Floor tiler tools
(0) Add a product
-
Hammers
(13) -
Knives, Scissors, Cutters
(182) -
Mason tools
(0) Add a product
-
Portable lights
(0) Add a product
-
Ratchet, Socket, Accessories
(14) -
Saws
(0) Add a product
-
Screwdriver, Screwdriver bits
(7) -
Tongs, Shears
(17) -
Tool box
(12) -
Wrench, Key
(15)
Offers to 1 of 50 sur 298
Sealing pliers
All our sealing pliers have plastified hands. Depending on the seal diameter you want to crush, you have to chose among 4 types : - 130 mm for 8 to 10 mm diameter seals - [...]
Bolt cutters
Bolt cutters Ideal to cut bolt seals, these cutters are available in 2 lengths : 600 and 750 mm, for a respective cutting diameter of 10 and 13 mm. The blade is in tempered [...]
Control nippers
These control nippers are so practical in the control of the entrance to ticketing stations, transportation areas and amusement parks.
Chopstick blade to suit PALGA
• Double sided double bevel, • 1 hole. • MIRRO POLISHED STAINLESS STEEL • Sizes : 445 x 25 x 2,5 • To suit : PALGA • Référence : [...]
Circular knife to suit TIROMAT 32-1.5
• Single bevel, • 3 holes. • Sizes : Ø 81 x 32 x 1.5 • To suit : TIROMAT • Reference : [...]
Circular dished slitter SB
• Single bevel • TOOL STEEL • Sizes : Ø 130 x 100 x 1,5 • To suit : - BILSTEIN - MARIO COTTA - DIENES - JAGGENBERG • Reference : [...]
Metric insert
MATERIALS - COLOURS STANDARD : • Natural Nylon. ON REQUEST : • Beige / Black / Brown / Grey / or other colours. • Colours : see RAL colour chart. Minimum [...]
Simplex mallet "C" EH 3706
Note:Automobile assembly and repair work, car body work, repair and maintenance work, sheet-metal working, dent removal, masonry work, scaffold construction, concrete form [...]
Black Craft Mallet, non-rebound EH 3379
Note:Automobile assembly and repair work, positioning of work pieces in the vice, straightening work, car body work, joining of work pieces, repair and maintenance work, [...]
Simplex mallet "C" EH 3704
Note:Automobile assembly and repair work, repair and maintenance work, foundriesCopper inserts 3804... must only be mounted into reinforced cast iron housing, black [...]
Shaft collars
Use: Efficient clamp for all kind of shaft CHARACTERISTICS:• Do not use separately• Materials : Collar : black [...]
Dowel pin
-The dowel pin is used for attaching one part to another. - Relative positioning - Material: stainless steel 303 - Sold by batch
Hot cutting scissors
For a welded cut Adjustable temperature 0 till 200° in accordance to the material
Lighting sockets
For festive atmosphere we offer lighting sockets and the corresponding illumination cables. They are intended to decorate frontages, illuminate streets or realize [...]
Cutting plier
The blade is in carbone steel 45. The hands are plastified. Total length : 110 mm - Weight :65 grams Available in stock - Packed in single bags - Customs tariff : 82 03 [...]
Driller tool for wire ties
Tool to tighten wire ties This gummi-coated tool has a 150 mm pulling length and a metallic hook. Its tensile strength is 300 kg 310 mm long - 390 [...]
CT3 pliers for stainless steel ties
CT3 tool to fasten stainless steel ties Available in stock 210x155x35 mm - 550 grams Tools cannot be returned or refunded when damaged with a standard [...]
PCP12 tightening pliers
Tool for electrician collars and all ties from 3.6 to 12 mm wide This red metallic tool enables an ideal tightning of ties. The cutting tooth is proper for a neat [...]
Tightening tool for 2.5 to 7.8mm wide ties
Fastening and cutting tool for 2.5 to 7.8 mm wide ties (PSP8) This black plastic tool has a cutting tooth. Available in stock About 170x140mm - Weight : 220 [...]
Tightening tool for 2.5 to 4.8 mm wide ties
Tool to fasten 2.5 to 4.8 mm wide ties There are 2 versions : one in red plastic (PSP), the other metallic (PSM) in red or blue Plastic : about [...]
Control nippers
Control nippers in hard steel with nickeled arms 115 mm long Can punch up to 35 mm far Large choice of punches : digits, letters, symbols etc (Square, heart, star, [...]
Safety knife GENERIC Left handed
• Sizes : For replacement blades 207 3N 5H • Reference : 0032073001
Circular knife to suit TIROMAT 32E
• Single bevel, • 3 holes. • 4 edge slots. • Sizes : Ø 81 x 32 x 1.5 • To suit : TIROMAT • Reference : [...]
Circular knife to suit TIROMAT 32-1
• Double bevel, • 3 holes. • Sizes : Ø 81 x 32 x 1 • To suit : CAVANNA • Reference : [...]
Circular knife to suit TIROMAT 22E
• Single bevel. • 4 edge slots. • Sizes : Ø 81 x 22 x 1,5 • To suit : TIROMAT • Reference : [...]
Circular knife to suit TIROMAT 22-1.5
• Single bevel. • TOOL STEEL • Sizes : Ø 81 x 22 x 1,5 • To suit : TIROMAT • Reference : [...]
Toothed blade to suit AQUARIUS 400
• Ref. E2850639, • FOOD QUALITY STAINLESS STEEL • Sizes : 370 x 19 x 3 • To suit : AQUARIUS • Reference : [...]
18mm Non snap-off blade PRO100
• Boxed in 100's • Sizes : Not scored higher Carbon Steel • Reference : 0020000003
18mm Snap-off blade PRO100
• 0.5mm weight • Sizes : Box of 100 packed by 10 • Reference : 0021001001
Pre-cutting blade to suit MADELEY
• 2mm tooth pitch, • Single-sided, • 3 Ø6.35mm holes, • QUALITY CARBON STEEL • Sizes : 220 x 31 x 1,2 • To suit : MADELEY • Reference : [...]
Toothed blade to suit BOSCH H-S 175
• 2mm pitch, straight cut, • 2 holes. • Sizes : 260 x 53 x 2 • To suit : BOSCH • Reference : [...]
OLFA replacement blade for SK-7
• Boxed in 10's • Sizes : Square shape for more safety • Reference : 0020000015
OLFA replacement blade for SK-8
• Boxed in 10's • Sizes : Square shape for more safety • Reference : 0020000016
Replacement blade for SK-4
• Boxed in 10's blue box. • Sizes : Heavy duty • To suit : - OLFA - PRO'COUPE • Reference : [...]
Toothed blade to suit BG PACK-HAYSSEN
• 2,5mm pitch, • 2+2 closed slots. • Sizes : Ø 240 x 34 x 1.5 • To suit : - HAYSSEN - BG PACK • Reference : [...]
Toothed blade to suit BOSCH
• 2mm pitch • 2 holes. • Sizes : 336 x 18 x 1,6 • To suit : BOSCH • Reference : [...]
Toothed blade to suit BOSCH 125 C
• 2mm pitch • 2 slots. • Sizes : 185 x 87 x 2 • To suit : BOSCH • Reference : [...]
Lame dentée pour ensacheuse BOSCH H-S 125
• 2mm pitch • 2 slots. • Sizes : 180 x 53 x 2 • To suit : BOSCH • Reference : [...]
Toothed blade to suit BOSCH POLY
• 2mm pitch, back bevel, • 4 holes. • Sizes : 267 x 18 x 1,6 • To suit : BOSCH • Reference : [...]
Toothed blade to suit ILAPACK Delta G
• 2.5mm pitch, • 1 hole • Sizes : 350 x 50 x 1,5 • To suit : ILAPAK • Reference : [...]
Toothed blade to suit ILAPACK Tigre
• 2mm pitch, • 1 hole • Sizes : 350 x 76 x 1,5 • To suit : ILAPAK • Reference : [...]
Full star punch to suit TIROMAT
• 2 slots 4mm. TiN coating • Sizes : 24 x 20 x 23,7 • To suit : TIROMAT • Reference : [...]
Toothed blade to suit ILAPACK-MIELE
• 5mm pitch, • 1 slot. • Sizes : 400 x 53 x 2.4 • To suit : - ILAPAK - MIELE • Référence : [...]
Toothed blade to suit MESOMA
• 5mm pitch, • 1 slot. • Sizes : 345 x 56 x 2,5/1,8 • To suit : MESOMA • Référence : [...]
Toothed blade to suit SANDIACRE TG 320
• 2mm pitch, • Back bevel, • 2 holes. • Sizes : 340 x 18 x 2.5 • To suit : SANDIACRE • Référence : [...]
Toothed blade to suit SANDIACRE TG2B
• 2mm pitch, • 2 holes. • Sizes : 190 x 53 x 2 • To suit : SANDIACRE • Référence : [...]
Toothed blade to suit TECNIMODERN
• 5mm pitch. • NO LUG. • STAINLESS STEEL • Sizes : 320 x 30/20 x 1.3 • To suit : TECNIMODERN • Référence : [...]
Toothed blade to suit OCME
• 3mm pitch grinded 1 side, • Back bevel,2 end notches, • STAINLESS STEEL • Sizes : 201 X 27 X 1,5 • Référence : [...]
Top Products
