Manufacturers, suppliers, industry products - industry trade fair
  Industrial suppliers   > GRESSEL > Our product range 
GRESSEL

Gressel

Since its foundation in 1923 by Edmund Gressel, the company has been in the possession of the family. Thanks to the entrepreneurial independence, the close interlinking between [...]



Offers 1 to 17 of 17

Hose reels 

View bigger picture
Profile bending machine HB 10
Contact GRESSEL

Profile bending machine HB 10

Portable machine for holding in vice. With nickel plated turn-table. Bending angle read-off up to 180°.  

Clamping tools, Tightening tools 

View bigger picture
Gripos® - the modular system
Contact GRESSEL

Gripos® - the modular system

Regardless of whether the work-pieces are hard or soft, have a cubic or irregular shape, whether processing is carried out on single units or over a series, fully automatically or [...]
View bigger picture
Bench vise PS
Contact GRESSEL

Bench vise PS

Opening backwards, with or without integrated C-clamp fixture. Of special cast iron, with prism guide, steel quill, covered spindle and case hardened jaws.  
View bigger picture
Conversion kit for duogrip-4-fold linear
Contact GRESSEL

Conversion kit for duogrip-4-fold linear

Clamp four work-pieces in a single line with only one rotating movement of a lever.  
View bigger picture
Drilling machine vice escopos
Contact GRESSEL

Drilling machine vice escopos

Easy to handle, universally applicable. Extensive clamp-width range. Jaws with shoulders, horizontal and vertical recesses for work-pieces of all shapes.  
Up
View bigger picture
Machine tool vise gripos VS with combi reversible jaws
Contact GRESSEL

Machine tool vise gripos VS with combi reversible jaws

- provided with combi-reversable jaws for greater clamping widths - an extensive assortment of jaws with M8 thread - only for use with press-down [...]
View bigger picture
Gripos® with standard reversible jaws
Contact GRESSEL

Gripos® with standard reversible jaws

Standard reversible jaws with triple application - protectively smooth - or ribbed - an extensive assortment of jaws with M8 thread  
View bigger picture
Gripos - 5A
Contact GRESSEL

Gripos - 5A

Genuine 5-face processing is possible. Clamping between tall support jaws provides the work-pieces with completely free spindle room for 5-face processing.  
View bigger picture
Clamping rail
Contact GRESSEL

Clamping rail

The clamping rail is the “fundamental body shape“ of the system, with two widths, each with three lengths, including a fixed jaw, making individual fitting out [...]
View bigger picture
Clamping machine
Contact GRESSEL

Clamping machine

Centric and single vice in one. For conventional clamping, tight clamping for 5-sided machining, shaped- and moulded parts or other raw material.  
Up

Positioners and Tightening components 

View bigger picture
Gripos® - the modular system
Contact GRESSEL

Gripos® - the modular system

Regardless of whether the work-pieces are hard or soft, have a cubic or irregular shape, whether processing is carried out on single units or over a series, fully automatically or [...]
View bigger picture
Gripos II - Modular construction for maximum economy
Contact GRESSEL

Gripos II - Modular construction for maximum economy

Regardless of whether the work-pieces are hard or soft, have a cubic or irregular shape, whether processing is carried out on single units or over a series, fully automatically or [...]
View bigger picture
Multigrip - Efficient Multi-Clamping
Contact GRESSEL

Multigrip - Efficient Multi-Clamping

With the possibility to also clamp different work pieces simultaneously, the multi clamping system means a further increase in the efficiency of the clamping manufacturing [...]
View bigger picture
Duogrip - Multiple-capability, multi-functional
Contact GRESSEL

Duogrip - Multiple-capability, multi-functional

The duogrip is a dual clamp with a third-hand function. Without the need for time-consuming change-overs it can be changed into a simple- or a multiple clamping unit while with a [...]
View bigger picture
Centros²
Contact GRESSEL

Centros²

Centric and single vice in one. For conventional clamping, tight clamping for 5-sided machining, shaped- and moulded parts or other raw material.  
Up
View bigger picture
Centrinos²
Contact GRESSEL

Centrinos²

Centric and single vice in one. For conventional clamping, tight clamping for 5-sided machining, shaped- and moulded parts or other raw material.  
View bigger picture
Grefors® - Clamping with senso-power
Contact GRESSEL

Grefors® - Clamping with senso-power

Mechanical clamping with sensitivity. Thanks to infinitely variable fine control, this is achieved in a manner which otherwise could only be achieved with pneumatic or hydraulic [...]

Top Products

Lumaphore 440

Top categories

Materials for production of mechanical components Radio frequency measurement Thickness measurements Laser marking Products for the chemical treatment of surfaces IT equipment Gelcoat Industrial ovens Rental of modular buildings Fire fighting Hydraulic presses
Open your online booth in less than 1 hour - click here
A brand of InfoPro Communications