Industry fair   > Measurement, Analyses and Tools   > Sensors   > Force sensors > All offers 

Force sensors

Manufacturers' and suppliers' offers for «Force sensors» . Compare offers for «Force sensors» and ask for a quotation online.

Open your online booth Suggest a category

Offers 1 to 30 of 30

 Check here if you wish to receive information on several products (10 maximum)

TEST - Electronic force measurement system Model 301

TEST

Electronic force measurement system Model 301, contact: TEST
View bigger picture
Electronic force measurement system Model 301

Electronic force measurement system Model 301

It comprises the load cell (sensor), connector cable, plugs and electronics.Load cells are available to detect compression and tensile forces of between 1 N and 40 MN, in various [...]
SENSY - Custom made load pin Model 5000

SENSY

Custom made load pin Model 5000, contact: SENSY
View bigger picture
Custom made load pin Model 5000

Custom made load pin Model 5000

-Double shear beam axle -Sturdy design -Stainless steel -Easy to install -Protection IP 65 ( IP 67 available ) -Available in "custom-made" design -A complete range [...]
SENSY - Standard load pin Model 5300

SENSY

Standard load pin Model 5300, contact: SENSY
View bigger picture
Standard load pin Model 5300

Standard load pin Model 5300

- Double shear beam axle -Sturdy design -Stainless steel -Easy to install -Protection IP 65 (IP 67 available) -A complete range of electronics, load limiters and [...]
SENSY - Custom made sensors

SENSY

Custom made sensors, contact: SENSY
View bigger picture
Custom made sensors

Custom made sensors

Your requirements in relation to an application may need a specific answer since no existing standard sensor or load cell is suitable, due to a dimensional or efficiency [...]
Up
SENSY - Reaction torque meter 6100-6105

SENSY

Reaction torque meter 6100-6105, contact: SENSY
View bigger picture
Reaction torque meter 6100-6105

Reaction torque meter 6100-6105

Universal non-rotating torque meter.Easy to install.Compact design.Available in version high temperature  and high output signal.  
SENSY - Custome made sensors : samples

SENSY

Custome made sensors : samples, contact: SENSY
View bigger picture
Custome made sensors : samples

Custome made sensors : samples

Your requirements in relation to an application may need a specific answer since no existing standard sensor or load cell is suitable, due to a dimensional or efficiency [...]
BAUMER BOURDON HAENNI - Inductive conductivity sensor

BAUMER BOURDON HAENNI

Inductive conductivity sensor, contact: BAUMER BOURDON HAENNI
View bigger picture
Inductive conductivity sensor

Inductive conductivity sensor

Fields: Chemical and Petrochemical IndustryFood and Beverage Industry Type  ISL05x  Measurement ranges:  -20...130 °C  Operating [...]
KISTLER SAS - Low level force sensor, M10x1, Axial Connector, –50 ... 50 N

KISTLER SAS

Low level force sensor, M10x1, Axial Connector, –50 ... 50 N, contact: KISTLER SAS
View bigger picture
Low level force sensor, M10x1, Axial Connector, –50 ... 50 N

Low level force sensor, M10x1, Axial Connector, –50 ... 50 N

CharacteristicsHigh sensitivity, extremely low response threshold, high natural frequency, measures tensile and compression forces, small dimensions.  ApplicationsMeasurement [...]
KISTLER SAS - Miniature force sensor for mold cavity pressure, 2,5 kN, coaxial cable, length with order

KISTLER SAS

Miniature force sensor for mold cavity pressure, 2,5 kN, coaxial cable, length with order, contact: KISTLER SAS
View bigger picture
Miniature force sensor for mold cavity pressure, 2,5 kN, coaxial cable, length with order

Miniature force sensor for mold cavity pressure, 2,5 kN, coaxial cable, length with order

CharacteristicsQuartz force sensor for the measuring range from 0 ... 2,5 kN or for measuring mold cavity pressure of up to >3 000 bar during injection molding of plastics.The [...]
Up
KISTLER SAS - Miniature force sensor, 2,5 kN, Plug BNC, Cable length with order

KISTLER SAS

Miniature force sensor, 2,5 kN, Plug BNC, Cable length with order, contact: KISTLER SAS
View bigger picture
Miniature force sensor, 2,5 kN, Plug BNC, Cable length with order

Miniature force sensor, 2,5 kN, Plug BNC, Cable length with order

CharacteristicsQuartz force sensor for the measuring range from 0 ... 2,5 kN or for measuring mold cavity pressure of up to >3 000 bar during injection molding of plastics.The [...]
KISTLER SAS - Measuring Tonge for Mold Cavity Pressure, 10 kN

KISTLER SAS

Measuring Tonge for Mold Cavity Pressure, 10 kN, contact: KISTLER SAS
View bigger picture
Measuring Tonge for Mold Cavity Pressure, 10 kN

Measuring Tonge for Mold Cavity Pressure, 10 kN

CharacteristicsEasy to install force sensors, high natural frequency, integrated connecting cable.  ApplicationsIndirect mold pressure measurement via ejector pin during [...]
KISTLER SAS - 3-Component Force Sensor, 5kN

KISTLER SAS

3-Component Force Sensor, 5kN, contact: KISTLER SAS
View bigger picture
3-Component Force Sensor, 5kN

3-Component Force Sensor, 5kN

CharacteristicsWide measuring range, high rigidity and sensitivity, low crosstalk, compact design Types 9251A and 9252A differ in relation to the position of the coordinate system [...]
KISTLER SAS - Multicomponent measuring platform, 30 kN, steel top plate with tapped holes

KISTLER SAS

Multicomponent measuring platform, 30 kN, steel top plate with tapped holes, contact: KISTLER SAS
View bigger picture
Multicomponent measuring platform, 30 kN, steel top plate with tapped holes

Multicomponent measuring platform, 30 kN, steel top plate with tapped holes

CharacteristicsHeavy-duty aluminum or steel cover plate, waterproof, very wide measuring range.  ApplicationsSpecial applications under more difficult conditions: [...]
KISTLER SAS - 3-Component Dynamometer, 30 kN

KISTLER SAS

3-Component Dynamometer, 30 kN, contact: KISTLER SAS
View bigger picture
3-Component Dynamometer, 30 kN

3-Component Dynamometer, 30 kN

CharacteristicsHigh resolution, great rigidity, high natural frequency, insensitive to temperature influences (basic unit can be connected to a cooling system). The dynamometer [...]
Up
KISTLER SAS - 4-Component Dynamometer, 20 kN

KISTLER SAS

4-Component Dynamometer, 20 kN, contact: KISTLER SAS
View bigger picture
4-Component Dynamometer, 20 kN

4-Component Dynamometer, 20 kN

CharacteristicsCompact, rugged, versatile in application, high resolution, great rigidity, high natural frequency, corrosion-resistant, protected against the ingress of spray [...]
KISTLER SAS - Rotating Multi-Component Dynamometer HS-RCD, max. 25'000 U/min.

KISTLER SAS

Rotating Multi-Component Dynamometer HS-RCD, max. 25'000 U/min., contact: KISTLER SAS
View bigger picture
Rotating Multi-Component Dynamometer HS-RCD, max. 25'000 U/min.

Rotating Multi-Component Dynamometer HS-RCD, max. 25'000 U/min.

CharacteristicsVersions for standard spindle adapters, tool holders with clamp, internal cutting fluid feed, non-contacting (wearfree) transmission of data (telemetry), CE [...]
KISTLER SAS - 3-Component Force Sensor, 100kN, Set with 4 sensors

KISTLER SAS

3-Component Force Sensor, 100kN, Set with 4 sensors, contact: KISTLER SAS
View bigger picture
3-Component Force Sensor, 100kN, Set with 4 sensors

3-Component Force Sensor, 100kN, Set with 4 sensors

CharacteristicsVery wide measuring range, high rigidity and sensitivity, low crosstalk, compact design, multipole plug connection, Types 9077B and 9078B differ in relation to the [...]
KISTLER SAS - Quartz Load Washers, 120 kN

KISTLER SAS

Quartz Load Washers, 120 kN, contact: KISTLER SAS
View bigger picture
Quartz Load Washers, 120 kN

Quartz Load Washers, 120 kN

CharacteristicsWide measuring range, high rigidity, compact design, accessories for fitting purposes.  ApplicationsMaterials testing, machine testing, measurement of [...]
KISTLER SAS - 3-Component Force Sensor, –2 ... 2 kN, Set of 4 sensors

KISTLER SAS

3-Component Force Sensor, –2 ... 2 kN, Set of 4 sensors, contact: KISTLER SAS
View bigger picture
3-Component Force Sensor, –2 ... 2 kN, Set of 4 sensors

3-Component Force Sensor, –2 ... 2 kN, Set of 4 sensors

CharacteristicsWide measuring range, high rigidity and sensitivity, low crosstalk, extremely small 3- component force sensor, multi-pole plug connection Types 9017B and 9018B [...]
Up
KISTLER SAS - Quartz Load Washers, 7,5 kN

KISTLER SAS

Quartz Load Washers, 7,5 kN, contact: KISTLER SAS
View bigger picture
Quartz Load Washers, 7,5 kN

Quartz Load Washers, 7,5 kN

CharacteristicsWide measuring range, high rigidity, compact design, accessories for fitting purposes.  ApplicationsMaterials testing, machine testing, measurement of [...]
SENSORTECHNICS FRANCE - Force sensor

SENSORTECHNICS FRANCE

Force sensor, contact: SENSORTECHNICS FRANCE
View bigger picture
Force sensor

Force sensor

FEATURES - Force range from 0 to 1500 g - Wide operating temperature range of –40 to 85 °C - High overload (4500 g) - Small SMT housing (9 x 4 x 3 [...]
AHLBORN MESURE ET RÉGULATION - Compression Sensor Type K1613

AHLBORN MESURE ET RÉGULATION

Compression Sensor Type K1613, contact: AHLBORN MESURE ET RÉGULATION
View bigger picture
Compression Sensor Type K1613

Compression Sensor Type K1613

Wire strain gauges in 4-conductor full-bridge circuit. Control resistance for final adjustment of the measuring range. All measuring ranges that are specified in Newton can also [...]
AHLBORN MESURE ET RÉGULATION - Compression Sensor Type K22

AHLBORN MESURE ET RÉGULATION

Compression Sensor Type K22, contact: AHLBORN MESURE ET RÉGULATION
View bigger picture
Compression Sensor Type K22

Compression Sensor Type K22

Wire strain gauges in four-conductor full-bridge circuit. Control resistance for final adjustment of the measuring range. All measuring ranges that are specified in Newton can [...]
AHLBORN MESURE ET RÉGULATION - Tension and Compression Sensor Type K25

AHLBORN MESURE ET RÉGULATION

Tension and Compression Sensor Type K25, contact: AHLBORN MESURE ET RÉGULATION
View bigger picture
Tension and Compression Sensor Type K25

Tension and Compression Sensor Type K25

Wire strain gauges in four-conductor full-bridge circuit. Control resistance for final adjustment of the measuring range. All measuring ranges that are specified in Newton can [...]
Up
GEFRAN - CB Deflection load cell

GEFRAN

CB Deflection load cell , contact: GEFRAN
View bigger picture
CB Deflection load cell

CB Deflection load cell

CB series load cells are designed for trouble free application in industrial environments. The cell body and the protective bellows of the strain gauge are in corrosion resistant [...]
GEFRAN - CT Toroidal force transducer for industrial applications

GEFRAN

CT Toroidal force transducer for industrial applications , contact: GEFRAN
View bigger picture
CT Toroidal force transducer for industrial applications

CT Toroidal force transducer for industrial applications

The CT series force transducers, have been specially designed for use in polymer processing in applications where it is required to measure the reaction force produced by the [...]
GEFRAN - CC Cylindrical force transducer for industrial applications

GEFRAN

CC Cylindrical force transducer for industrial applications , contact: GEFRAN
View bigger picture
CC Cylindrical force transducer for industrial applications

CC Cylindrical force transducer for industrial applications

The CC force transducers have been designed for use in the plastics industry where it is required to measure the reaction force to the extrusion pressure that is present on the [...]
GEFRAN - CU Compact load cell for compression applications

GEFRAN

CU Compact load cell for compression applications , contact: GEFRAN
View bigger picture
CU Compact load cell for compression applications

CU Compact load cell for compression applications

  Range of measurement: from 50 to 1,000 KgAccuracy class: 0.2%All stainless steel constructionCorrosion resistantGrade of protection: IP67 (DIN 40050)Compact [...]
GEFRAN - CM Load cell for compression applications

GEFRAN

CM Load cell for compression applications , contact: GEFRAN
View bigger picture
CM Load cell for compression applications

CM Load cell for compression applications

    Range of measurement: from 100 to 50,000 KgAccuracy class: 0.1%All stainless steel constructionCorrosion resistantInternally generated calibration [...]
GEFRAN - TR Force transducer for measuring the tension on fixed or rotating spindles

GEFRAN

TR Force transducer for measuring the tension on fixed or rotating spindles , contact: GEFRAN
View bigger picture
TR Force transducer for measuring the tension on fixed or rotating spindles

TR Force transducer for measuring the tension on fixed or rotating spindles

          Range of measurement: from 100N to 2kNAccuracy class: 0.5%Corrosion resistantInternally generated calibration [...]
Up
 Check here if you wish to receive information on several products (10 maximum)
Open your online booth in less than 1 hour - click here