Electronics
Manufacturers' and suppliers' offers for «Electronics» . Compare offers for «Electronics» and ask for a quote online.
-
Active components
(272)Active harmonic filters
(2)Amplifiers
(16)LED, Displays
(19)- ...
-
Audio electronic components
(83) -
Components for electronics
(1) -
Electric measurement
(21)Devices and Software
(21)
-
Electronic board assembly
(7) -
Electronics-CAD
(0) Add a product
-
EMC Filters
(0) Add a product
-
EMC Shielding
(1)Hoods
(1)
-
Optoelectronic components
(28)Diodes
(3)Lasers
(24)Photomultipliers
(1)
-
Passive components
(173)Adapters
(7)Buttons
(2)Capacitors
(1)- ...
-
Production of electronic cards
(0) Add a product
-
Production of semi-conductors
(2) -
Remote communication
(0) Add a product
-
Sub-assembly
(60)Applification specific standard products (ASSPs)
(2)Connector technology
(11)Converters
(15)- ...
-
Thermal management
(3)Heat sinks
(1)Thermal pads
(2)
Offers to 251 of 300 sur 651
CP-11/21 Processor Module
CP-xx (CP-10, CP-11, CP-21) processor modules provide all processing, I/O scanning, logic, control and communications functions required in any of the RTU configurations that [...]
Piezo controller and amplifier : Modular system ENV
ENV - the modular plug-in-system : The amplifier system ENV is a modular system with a 19 housing.In special applications it is possible to combine one or more amplifier [...]
Piezo controller and amplifier : ENV amplifier modules
The resolution of piezoelectrical actuators is nearly unlimited. Because of this the piezo amplifiers plays a key roll in the high accuracy of nano-positioning equipment.With a [...]
Piezo controller and amplifier : ENT main supply modules
ENT power supply units : The ENT module supplies the main voltages for the ENV amplifier module, which is the actual amplifier. In the casing, the ENT and ENV modules can be [...]
Piezo controller and amplifier : EDA interface modules
Series EDA interface boards : - Universal AD/DA interface boards.- 4 channel DAC.- 8 channel ADC.- 16 bit resolution.- 8 bit µP, 64 k RAM, 128 k Flash on-board [...]
Piezo controller and amplifier : digital system d-Drive : amplifier 50mA
EVD50 - digital amplifier module for piezoelectric actuators : The EVD50 is a full digital amplifier which is designed for low voltage piezoelectric actuators. The amplifier [...]
Piezo controller and amplifier : digital system d-Drive : interface/display
Interface- and display module EDS 1 and EDS 2 : The data interface modules EDS 1 and EDS 2 enables communication between the user and the piezo system. The EDS 2 [...]
Piezo controller and amplifier : digital system d-Drive : OEM amplifier 30DV50
The line of digital piezo amplifiers (d-Drive) of piezosystem jena is now expanded by the OEM amplifier module 30DV50. The 30DV50 was designed for universal use with a main supply [...]
Piezo controller and amplifier : piezo controller 1-channel version : 5V10 GRIPPY OEM-amplifier
The special OEM amplifier 5V10 GRIPPY has been developed for easy control of the piezo gripper GRIPPY.The amplifier enables the programming of two fixed end positions. The gripper [...]
Measurement instruments : DigiLineTM : Controllers : DPG 101
Controllers with 1 and 9 channels are suitable for operating the transmitters. Their intuitive operation affords simple transmitter calibration.
Accessories Turbopumps : Power supplies / Display control units / Control units : DCU 150
DCU 150, Display control unit incl. power supply. Product description: DCU 150, Display control unit incl. power supply TPS is used for the voltage supply of the CompactTurbo [...]
Accessories Turbopumps : Power supplies / Display control units / Control units : DCU 001
Accessories for process adaption of the pump.DCU 001, Display control unit. - Display and operating instrument for Pfeiffer Vacuum drive instruments.- Ensures the control of [...]
Magnetic Display MA100/2
This display interprets the data of distance and angle measurement captured by the magnetic sensor MS100/1. The display is widely and individually programmable and is also [...]
Magnetic Display MA501
The magnetic display MA501 is a novel, multi-functional axis display with hard-wired sensor for use in combination with the magnetic strip MB500 or magnetic rings MR500. [...]
Magnetic Display MA502
This display serves to interpret information from the incremental MS500 magnetic sensor for distance and angle measurement. The display parameters are comprehensive and [...]
Magnetic Display MA506
With this particularly kompact magnetic display information from the connected MS500 sensor is interpreted for position and angle measurement. The display has a broad range of [...]
Magnetic Display MA505
With this display the information of the absolute magnetic sensors MSA or LSA200 is processed for distance or position measurement. The display is comprehensively and indivually [...]
Magnetic Display MA561
This very compact magnetic display processes the information of the connected, absolute measuring sensor for path and angle measurement. The display parameters are comprehensive [...]
Magnetic Display MA504
Mains-independent, quasi-absolute magnetic display with lowest-power technology for direct position and angle sensing, e. g., on end stop systems. Owing to easy integration, the [...]
Magnetic Display MA503/1
Battery-powered, quasi-absolute magnetic display for direct position information, e.g. on limit stop systems. This concept offers to the customer high flexibility through easy [...]
Magnetic Display MA508
Self-sufficient, ”electronic ruler“ for direct sensing and display of positions, e.g., on stop systems. Owing to its easy integration and extremely long run time, the system [...]
Translation Module AEA111/1
This high-resolution module converts the position information of the magnetic sensor MSA111 into SSI + RS485 signals. In addition the module provides the analog 1Vss Sin/Cos [...]
Translation Module AS510/1
High-resolution electronics for connecting the pluggable MS500 magnetic sensor. The AS510/1 provides digital quadrature signals with resolutions up to 5 ?m after 4x pulse [...]
Translation Module ASA510
Sensor and translation module gather positional changes quasi-absolutely, even in the dead state. The system is particularly suited for very long distances with relatively rough [...]
Translation Module AEA
This high-resolution translation module converts the measured values captured by the sensor into serial or parallel data (similar to data issued by an absolute rotary/angle [...]
Eletronic Display MA07/1
Suitable for indication of values measured by various types of distance and angle encoders. The electronic display units are freely programmable and have interfaces for [...]
Electronic Display MA10/4
Freely programmable electronic display for indicating position values captured by incremental and absolute measurement systems. The alphanumeric display enables clear [...]
Multi-functional Display MA20
Variable display for synchronous representation of the position values capt-ured from two axes. Four slots provide various possibilities to combine input and functional cards. [...]
3 Axis Display MA23
Freely programmable electronic display with a three-row LED display enabling individual configuration of three measuring systems. Even the standard version is equipped with three [...]
Electronic Display MA50
Extremity compact, freely programmable 4-digit electronic display. The measured information captured by absolute sensors with analog signal output. The display can be freely [...]
Electronic Display MA55
Extremity compact, 5-digit electronic display. Incremental measurement information of length and angle sensors. The display is freely programmable for use with various sensors and [...]
Single-Axis Positioning Control MA90/ MA91
Single-axis control for direct positioning via required-value input. Its memory enables the storage of 99 required values. Required and actual values can be read simultaneously [...]
Geared Potentiometer GP02
Geared potentiometer for absolute position sensing with analog output. Easy handling and compact design.
Geared Potentiometer GP03/1
Compact rotary encoder for absolute position sensing with potentiometric output signal or current interface.
Geared Potentiometer GP04/1
Robust geared potentiometer for absolute positioning - available with solid or hollow shaft.
Geared Potentiometer GP09
Geared Potentiometer as an absolute encoder with analog output. Compact dimensions and easy handling with a 20mm hollow shaft.
Geared Potentiometer GP43
Compact rotary encoder for absolute position sensing with integrated camshaft gear. Versions with potentiometer or current output are available.
Geared Potentiometer GP44
Robust rotary encoder for absolute position sensing, optionally with solid or hollow shaft and integrated camshaft gear, potentiometer or current interface.
AC-DC Power converter
Power converter, supplies DC-standards fans from AC powerParallel use of several fans possibleIdle- and short circuit protectedProtective insulation conforms to VDEAttractive and [...]
Hand switch in low voltage; 12V/1mA
Hand switch in low voltage; 12V/1mA, with screws to mount under the table. Is used mostly for columns which are built in tables .
Hand switch RNV
Hand switch RNV / low voltage (12V/1mA) with a hook behind to hang it up. Is used for actuators or columns with a 7-poles control socket
Foot switch LN with metal plate
Foot switch RNV / low voltage (12V/1mA) with metal plate. Is used for actuators or columns with a 7-poles control socket .
Hand / Foot switches
Foot switch PN with metal plate. Is used for actuators with a pyramid on the top of the housing
Controls : Stepper motor technology : PA-CONTROL Compact
Control and amplifier for two axes : PA-CONTROL Compact is a control unit and amplifier for two spepper motors. Fourteen additional servo or stepper motor axes axes can be driven [...]
Controls : Stepper motor technology : PA-CONTROL MP
Control and amplifier for a 2 phase stepper motor axis :PA-CONTROL MP is a control unit and amplifier for one stepper motor and is designed for wall fastening. Fifteen additional [...]
Controls : Stepper motor technology : LV-Single
Power electronics for one stepper motor in 19/2 rack :The power amplifier LV single is used for driving a 2 phase, 3 phase or 5 phase stepper motor. All connections are on plug [...]
Controls : Stepper motor technology : LV-Unit
Power electronics for four stepper motors in 19 rack :The power amplifier LV-UNIT is used for driving up to four 2, 3, or 5 phase stepper motors. All connections are on [...]
Top Products
