Communications interface
Manufacturers' and suppliers' offers for «Communications interface» . Compare offers for «Communications interface» and ask for a quote online.
-
HART Protocol
(0) Add a product
Offers to 1 of 34 sur 34
RS-232 and USB Interface
- RS-232 and USB connexion interface for scopes HM1000, HM1008, HM1500 and HM1508.
DSR-12 – Ethernet Communications Backbone
The Data Source Rack (DSR) is a rack based system that allows easy inclusion of up to 12 DSM’s (Data Source Module) at a time. The complete system contains multiple serial [...]
Portable echometer (TDR), 15km max, 20-3000ns, 20Vmax
- Impedance, Vp, gain, pulse width and vertical position are automatically selected and adjusted as you scan the cable.- Two Pair Test Capability.- Automatic Instrument Control [...]
10/100 BASE-T Ethernet interface for WAVEJET scopes
10/100 Base-T Ethernet Interface for WaveJet 300A Series. The WJ-A-LAN and WJ-A-GPIB interfaces are automatically recognized by, and are compatible with, all WaveJetA [...]
Infrastructure Components : 0AC808.9
The AC808 Ethernet hub is a standalone device that can be used universally as a Level 2 hub in standard Ethernet or POWERLINK networks. It is suitable for both 100 MBit/s (Fast [...]
POWERLINK - Ethernet TCP/IP
To simplify development, maintenance and the supply chain, there is a strong demand from the automation industry to unify all levels of sufficient data communication to [...]
DOLD CANopen PLC
Increasing complexity of control systems in machines and plants and a strong tendency to decentralization induced by an increasing use of intelligent subsystems explain the [...]
DOLD bus modules
Increasing complexity of control systems in machines and plants and a strong tendency to decentralization induced by an increasing use of intelligent subsystems explain the [...]
Field bus interface PFA 700
Field bus interface in 19 standard rack for interworking of up to nine automatic burner control units PFS or PFD with PROFIBUS DP. The PFA 700 is integrated in the ready-wired [...]
Muxponder: 4/8 x Fast Ethernet
The LambdaDriver® EM2009-FXM/ EM2009-FTXM modules use an advanced Time Division Multiplexing (TDM) technology for their Fast Ethernet ports, which can interconnect 10 Mbps and [...]
Fiber Driver Gigabit Ethernet and Multirate Multiplexers
The Fiber Driver® EM316xxMX2R time division multiplexers (TDM) are access modules designed to boost optic fiber and wavelength utilization while providing trunk redundancy [...]
T1/E1 and 10/100 Ethernet
Fiber Driver T1/E1 multiplexers extend the distance, functionality, and management of copper networks while optimizing the use of the existing fiber optic plant. They use advanced [...]
Fiber Driver AHSH Family Fast and Gigabit Ethernet
The Fiber Driver® Optical Ethernet Service Demarcation (OESD) modules enable service providers to build a fully managed point-to-point fiber optic link with a single manager [...]
Fiber Driver Ethernet Universal Service Module (EUSM)
The Fiber Driver Ethernet Universal Service Module (EUSM™) is the ultimate converter-based Optical Ethernet Demarcation device for bookend pair applications only. Flexible and [...]
Alcatel-Lucent 1521 Copper Line IP
The Alcatel-Lucent 1521 Copper Line IP (CL IP) is a carrier-class platform that enables carriers and service providers of all sizes to deliver service-rich business broadband [...]
* Extends the reach of native Ethernet services to sites without access to fiber
* Provides low-cost, flexible deployment options with the capability of being either CPE or [...]
Ethernet Networks
Analyzer Ethernet Network . The analyzer ethernet network is the first process analyzer architecture designed around widely-used and accepted PC hardware and operating [...]
Process Analytics - The Integrated Solution .
LR-11 - LonWorks Fibre Router
The LR-11 router offers an easy way to extend the distance between LONWORKS® 78 kbit/s TP/FT network segments using a high-speed 1.25 Mbit/s backbone fibre optic network link. [...]
LRW-112 / LRW-112PP router
The LRW-112 / LRW-112PP router offers an easy way to extend the distance between LONWORKS® 78 kbit/s TP/FT network segments using a high-speed 1.25 Mbit/s backbone fibre optic [...]
Lynx 100 - Industrial Ethernet Switch
The Lynx 100 switch with limited management fulfils the toughest industrial environmental requirements. The switch incorporates four priority queues to ensure that the network [...]
Lynx 300 - Industrial Ethernet Ring Switch
The managed Lynx 300 fulfils the toughest industrial environmental requirements. The Fast Re-configuration of Networks Topology (FRNT) concept offers ultra fast reconfiguration [...]
Lynx 400 - Industrial Ethernet Ring Switch
The managed Lynx 400 fulfils the toughest industrial environmental requirements. The Fast Re-configuration of Networks Topology (FRNT) concept offers ultra fast reconfiguration [...]
Industrial Ethernet FX/TX Media Converter
The MCW-211 is an Industrial Ethernet FX/TX Media Converter. The MCW-211 convert data between Ethernet 10/100 Base-TX and 100 Base-FX. The unit is easy to use and install caused [...]
DDW - Ethernet SHDSL Extender
The DDW-100 is a plug and play Industrial Ethernet SHDSL extender. It is designed as a transparent Ethernet Extender for 10/100BaseTX networks. SHDSL represents the best of [...]
DDW-220 Extender
The DDW-220 can be used to extend Ethernet networks over existing copper cables in point-to-point or line sharing applications. Point-to-point transmission distances of up to 10 [...]
ED-200 industrial Ethernet router
L’ED-200 est un routeur Ethernet industriel doté d’un switch 4 ports 10/100 le rendant particulièrement adapté pour la plupart des applications de communications distantes [...]
EDW-100 Ethernet Terminal Server
The EDW-100 is an is an Industrial Ethernet to serial adapter or Ethernet Terminal Server, designed for industrial use in harsh environments. The unit use standard TCP/IP [...]
FD-10 Industrial universal Profibus DP slave unit
The FD-10 is an Industrial universal Profibus DP slave unit that is able to transfer Profibus DP data via leased lines, dialup modems or radio systems without the use of special [...]
GDW-11 GSM/GPRS modem
The GDW-11 is a GSM/GPRS modem designed for industrial applications that can be used on 900 and 1800 MHz GSM networks.The modem requires a SIM card to provide connection to a [...]
TD-23 Modem
The TD-23 can be used for point to point or multidrop applications connecting equipment supporting either an RS-232/V.24 or RS-422/485 interface. The modem is designed for 2- or [...]
Ethernet Remote I/O Modules
The modules connect a wide variety of electrical, electronic, and mechanical devices and sensors -- such as pumps, temperature and pressure transmitters, motors, and more — to [...]
