Clamping tools, Tightening tools
Manufacturers' and suppliers' offers for «Clamping tools, Tightening tools» . Compare offers for «Clamping tools, Tightening tools» and ask for a quote online.
-
Bolting
(128) -
Fastening, Fixation
(180)
-
Nuts
(44) -
Toggle clamp
(2)
Offers to 151 of 200 sur 383
Adjustable feet plasto
Support and levelling of machines. Adjustable feet plasto are full Nylon products. General tolerance : + / - 0.3 mm. Unit of sale : 1 000 pieces per [...]
Metric hex tapped spacers M2,5
The spacers allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is heat resistant and can withstand variations in temperature from - [...]
Adjustable feet plastodreh
achines. Adjustable feet plastodreh are full Nylon products (swivelling screw). General tolerance : + / - 0.3 mm Unit of sale : 1 000 pieces / [...]
Adjustable feet plastoball
Support and levelling of machines. Adjustable feet plastoball are full Nylon products. General tolerance : + / - 0.3 mm. Unit of sale : 1 000 pieces / [...]
PCB spacers with clips M3 / M4
Designed for plates/ PCB’s/ etc… ø 4.0 mm. Good dimensional stability.
Adjustable feet plastofeet
Support and levelling of machines. Adjustable feet plastofeet are full Nylon products (swivelling screw). General tolerance : + / - 0.3 mm. Adjusatble feet [...]
Adjustable feet plastofix
Support and levelling of machines. Adjustable feet plastofix are full Nylon products (swivelling screw). Adjustable feet plastofix are also available in D = 99 mm [...]
Metric hex tapped / threaded spacers
The spacer allows a constant gap between 2 components. It is insulating and absorbs noise and vibrations. It can withstand variations in temperature from - 30°C to + [...]
Shoulder washers d=6
deal for insulating different materials. Protects from dust, avoid corrosion and resists most chemicals.
Shoulder washers M6
Ideal for isolating different materials. Protects from dust, avoids corrosion and resists most chemicals.
Saddle washers / spacers M8
MATERIALS - COLOURS STANDARD : • Black Nylon. ON REQUEST : • Natural nylon / Black PE / PP / POM / Black POM. Minimum quantity on request. • Colours : see RAL [...]
Bushings M10
Ideal for isolating different materials. Protects from dust, avoids corrosion and resists most chemicals.
Round spacers d = 20,0
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Bushings M20
Ideal for isolating different materials. Protects from dust, avoids corrosion and resists most chemicals.
Round spacers d = 16,2
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Shoulder washers M8
Ideal for isolating different materials. Protects from dust, avoids corrosion and resists most chemicals.
Round spacers d = 8,2
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Round spacers d = 10,2
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Round spacers d = 6,2
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Round spacers d = 5,3
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Round spacers d = 3,6
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Various nylon flat washers
Protects surfaces and offers good electrical insulation. Resists corrosion and most dilute acids. Absorbs shocks and vibrations. Combustibility UL94-V2. The thickness [...]
Metric finishing washers STB20 - 5
Protects surfaces and offers good electrical insulation. Absorbs shocks and vibrations. For use with cheese head screws.
Metric finishing washers STB20 - 4
Protects surfaces and offers good electrical insulation. Absorbs shocks and vibrations. For use with cheese head screws.
Metric finishing washers RCC
Protects surfaces and offers good electrical insulation. Absorbs shocks and vibrations. For use with countersunk head screws.
Saddle washers / spacers
Resists corrosion and most dilute acids. Absorbs shocks and vibrations. Combustibility UL94-V2. 2 x dimension "R" corresponds to tube [...]
Locating washers
Locating washers are manufactured in three different colours so that you can quickly identify the regular maintenance periods on machines : 1 = red washer = daily lubrication 2 [...]
Self-adhesive washers
Adhesive only suitable as an aid to mounting. Other dimensions on request. For products range, the RAL colours are not available.
Washers NFE 25-513 / serie "MU"
The DIN / NFE norm has been created for metallic products, the dimensions of plastic products are close. Washers NFE 25-513 old norm NFE 27611. Protects surfaces and offers [...]
Neoprene washers
Resistant to tensile strength 6MPA. Tensile elongation from 200 to 300% according to the type of hardness. Good resistance to ozone. Hardness between 45 and 65 Shore for the [...]
Soft PVC washers
Low resistance to temperature from -35 to +50°C. Resistance to acids conditional, good resistance to acids to alkalis and oil. Other dimensions on request. For this [...]
PTFE (Teflon) washers
Very good resistance to the temperature from -200 to +260°C. Very good resistance to acids, alkalis, fuel and oil, nonflammable, UL 94 VO fire classifaication. Other [...]
Black Nylon washers
Other dimensions on request. For this prodcuts range, the RAL colours are not available.
DOFA / Double locking and sealing washers
Screws, bolts and nuts are locked. Sealing is achieved thanks to internal and external shoulders (the internal shoulder goes into the thread of the screw and the external one [...]
Metric locknut
MATERIALS - COLOURS STANDARD : • Nylon 6 + 30 % Glassfilled. • Grey RAL 7035 / Black RAL 9005. ON REQUEST : • Colours : see RAL colour [...]
Push-in clips
Easy assembly system. Assembling by pressing and giving a quarter turn. These push-in clips can be used only once. Only the male parts are [...]
MATERIALS - COLOURS
STANDARD :
• Natural POM. POM = Polyacetal ( Delrin ).
ON REQUEST :
• White / Red / Yellow / Green / Blue / Grey / Black or other [...]
Snap-in clip D16 (for assembly)
N. B. : 1 000 pieces = 500 snap-in clips. Hole Ø = diameter of hole recommended.
MATERIALS - COLOURS
STANDARD :
• Natural.
• PA = Nylon.
• POM = Polyacetal ( Delrin ).
ON REQUEST :
• White / Red / Yellow / Green / Blue / Grey / Black or [...]
Three-stars grip BPF 184 (male)
When using a male insert we recommend a lock nut if fully tightening down to the end of the screw. Optional cover for Three-stars grip BPF 184 : • for M6 = Ref. : [...]
Round spacers d = 2,6
The spacer allows a constant gap between 2 components. It is insulating and absorbs vibrations. It is highly resistant to temperature and liquids therefore safe to use in a [...]
Handles
Handles type PF 94, 118, 132, 150, 180 Plastic handles for all industrial sectors (furniture, medical, electronics, metal construction...). Screw cover included. Fixing [...]
Snap-in clip D12 (for assembly)
N. B. : 1 000 pieces = 500 snap-in clips. Hole Ø = diameter of hole recommended.
Adjustable feet D 25
Support and levelling of machines. Adjustable feet D 25 are full Nylon products. General tolerance : + / - 0.3 mm. Unit of sale : 1 000 pieces per [...]
Wing screws BPF 10
Other lengths on request. For this screw in all Nylon, please refer to chapter "Screws".
Three-stars plastimont body CO 184
Plastic Knob in kit form. Make your knob yourself with Plastimont bodies ! Insert hex screw or nut made of steel, stainless steel, brass, nylon or other material. Housing [...]
Screw caps
Protects from dirt. Protects metallic screws from corrosion and deterioration. Resists weather conditions and most chemicals. N.B. : depending on the mould, the surface of the [...]
Cheese head screw DIN 84
Washer faced head screw on request. M12 : out of DIN standard. Lengths 15 and 17 mm - 10 000 p. min. Qty - 5 mm non threaded under the head. Unit of sale : M2 up to M10 : 1 [...]
Hex nuts DIN 934
Good resistance to chemicals (PP). Good wear resistance and low coefficient of friction. Good resistance to shocks.
Shoulder washers M3
Ideal for isolating different materials. Protects from dust, avoids corrosion and resists most chemicals.
Bülte locking and sealing washers
Locking and sealing of your assembly washer + screw, or standard nut (category 8.8 or less). No Nylstop or lock nut required. Easier stock management. Reduces purchasing [...]
Top Products
