Clamping tools, Tightening tools
Manufacturers' and suppliers' offers for «Clamping tools, Tightening tools» . Compare offers for «Clamping tools, Tightening tools» and ask for a quote online.
-
Bolting
(20) -
Fastening, Fixation
(87)
-
Nuts
(24) -
Toggle clamp
(2)
Offers to 1 of 50 sur 166
Lobe knobs VCT.FP
The particular design of this knob follows rigorous ergonomic standards: five-lobe shape, blended radius, well proportioned rim height offer a natural, safe and comfortable [...]
Vertical toggle clamps with folded base MVA.Inox
MaterialAISI 304 stainless steel. - Execution AX: with open clamping lever and two mounting flanges. - Execution EX: with solid clamping lever and bolt retainer.RivetsAISI 304 [...]
BINDER accessories: Interior fittings - Racks and shelves
High-quality and sturdy rack or perforated shelf, either chrome plated or in stainless steel. Ideally suited for all equipment sizes and various applications.
External circling
Shaft snap ring:- Elastic ring inhibiting axial deplacement of a shaft- Put in place by elastic deformation using a special clip- Material: cold-laminated (type 420) stainless [...]
"Nyloc" locking nut
- In accordance with DIN 985 - Locking nut - Nylon insert - Material: Stainless steel A2 303/304 - Sold by batch
Nord-Lock washers
Since the Nord-Lock Group began operations in 1982 we have focused on providing the world’s most effective bolt securing system. Our products are based on leading wedgelocking [...]
Our premium bolt securing systems give effective security
throughout an assembly’s lifetime, resulting in:
No bolt loosening caused by vibration and dynamic loads, Minimized [...]
Ball-screws MISUMI
MISUMI offers a wide range of ball-screws. Our customers can choose between grinded and rolled ball-screws. MISUMI offers diameter from 8mm to 25mm and lead from 2mm to 40mm. [...]
MISUMI offers more than 1 million mechanical standard-, purchasing- and drawing-components from one source. The voluminous catalogue contains over 40 product groups and all [...]
Stainless steel screws
MISUMI offers many sizes and types of stainless steel screws. Shipping from one piece, as well as in a pack of 200 to 500 pieces. Following types are [...]
MISUMI offers more than 1 million mechanical standard-, purchasing- and drawing-components from one source. The voluminous catalogue contains over 40 product groups and all [...]
High Knurled Thumb Screws in steel and stainless steel to DIN 464
Material, surface finish : Free-cutting steel black oxide finish; stainless steel natural finish Note : [...]
Clamp Levers with internal thread
Material : - Handle in die cast zinc to DIN 1743,- Steel parts quality class 5.8 Surface finish : [...]
Accessories - RB
• WALL BRACKET FOR R2 CASE • Always ready for emergencies ! • Saves space and time • Applications: First Aid kits, maintenance [...]
Accessories - RA
• WALL BRACKET for R1 case • Always ready for emergencies • saves space and time • Applications: First aid kits, maintenance [...]
13 PLASTIC CAPS
BÜLTE features an extensive selection of plastic caps with variant head style, for all metal screws : · Caps for countersunk head [...]
Screw caps are manufactured in Polyethylene (PE) and can be used in numerous and diverse applications i.e. furniture, automotive, toys and general engineering sectors.
PLASTIC SCREWS
We manufacture: All the standard screws, cheese, pan, wing, mushroom, flat, hex, Philips, raised & countersunk, knurled thumb, cup square head, triangular and [...]
New: Self-locking Nylon Nuts
Bülte has added a series of plastic lock nuts : The self-locking nuts are suitable for applications that require extra security as they eliminate backlash without [...]
Self-locking nuts are being used as a secure fastening nut for joining many kinds of parts.
High Precision Collets ER
– High polished finish for extra accuracy and long life, especially when clamped in HAIMER ER chucks– superior clamping strength– fits all brands of ER [...]
HG-Collets and HG Cone Wiper
For clamping tools with cylindrical shank with utmost precision in HG chucks.
Cap head screws
Standard accessories in the Mink HP-System Cap head screws, DIN 912 M6 x 20 non-corroding + spring washer, DIN 7980 non-corroding.
Vertical Clamps with straight foot and adjustable clamping spindle
Material : Steel Surface finish : - Galvanized and chromated,- Clamping spindle and nuts phosphated,- [...]
Gripos - 5A
Genuine 5-face processing is possible. Clamping between tall support jaws provides the work-pieces with completely free spindle room for 5-face processing.
ARNOL mat manual high pressure hydraulic vises for machining centers
Easy to remove movable jaw for cleaning of the vise body interior.Large selection of accessories available.All the vises have a serial number, and we keep records of all relevant [...]
Arnold twin manual high pressure vises
Specific features of the Arnold twin high pressure vise with hydraulic power booster: Manual clamping mechanism with hydraulic power booster.Arnold twin high pressure vises clamp [...]
Swivel Mount - Triton 1500, 2000
The swivel mount is easy to install keeps your Magellan Triton in safety, comfort for reading and use. The adjustable swivel allows for comfortable reading and using optimal: [...]
Mounting bracket for bicycles - Triton 1500, 2000
Navigate with your Magellan Triton on your bicycle or any other vehicle in sight. This sturdy adjustable support keeps your GPS in place on your bike for comfort reading and use. [...]
Vehicle Mount – Triton 1500, 2000
Sturdy adjustable suction mount securely holds your Magellan Triton for convenient viewing. The vehicle mount makes it easy to navigate with your Triton while in your vehicle. [...]
Clamping Elements EH 2301
Material: Heat-treated steel, quality 8 bright, quality 10 black
T-Nuts, DIN 508
Clamping Elements EH 2305
Note:Conical seats form D are to be used only for plain, closed ring areas.For elongated holes only use form G. Material: Spherical washer Case-hardened steel, case [...]
Spherical Washers Conical Seats, DIN 6319
NEW WING SCREWS
Specialist in plastic fasteners, BÜLTE screw range includes 5 new models of wing screws, offering more than 160 possibilities. The advantages: finger tightening [...]
The advantages: finger tightening (no tools required). Suitable for all sectors of industry (furniture, electronics, engineering, etc.), these screws are ideal for manual assembly.
High pressure automatic vices - ARNOLD MAT oleo-dynamic
The ARNOLD MAT has a descending clamp system to avoid that the clamped part lifts up. This is a semi-sphere installed between the moveable jaw and the spindle shoe. When the [...]
High pressure automatic vices - ARNOLD MAT pneumo-hydraulic
The ARNOLD MAT has a descending clamp system to avoid that the clamped part lifts up. This is a semi-sphere installed between the moveable jaw and the spindle shoe. When the [...]
High pressure automatic vices - ARNOLD MAT automat
The ARNOLD MAT has a descending clamp system to avoid that the clamped part lifts up. This is a semi-sphere installed between the moveable jaw and the spindle shoe. When the [...]
High pressure vices - ARNOLD TWIN oleo-dynamic
The exterior clamping pressure towards the centre provides a dynamically compensated clamp and avoids deformation
High pressure automatic vices - ARNOLD TWIN pneumo-hydraulic
The exterior clamping pressure towards the centre provides a dynamically compensated clamp and avoids deformation.
High pressure automatic vices - ARNOLD IZ1
Various clamps on one single base plate available, with a single oil input. In this way, a monoblock is obtained which can clamp a large number of small work-pieces taking up [...]
High pressure automatic vices - ARNOLD IZ2
Various vices on one single base plate available. Possibility of jaws adapted to the geometrical requirements of the work-piece. Made to measure jaws on request. Automatic [...]
High pressure automatic vices - ARNOLD oleo-dynamic
The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
High pressure automatic vices - ARNOLD pneumo-hydraulic
The force applied by the high pressure spindle is transmitted to the work-piece in the exact centre of the clamping jaw.
High pressure automatic vices - ARNOLD COMPACT oleo-dynamic
The ARNOLD COMPACT has a descending clamp system to avoid that the clamped part lifts up. This is a semi-sphere installed between the moveable jaw and the spindle shoe. When [...]
High pressure vices : Mechanical spindle
The intensifier system on these spindles is based on a series of elements which, as one supports the other, are able to obtain a power intensifying effect by means of a handle [...]
High pressure vices : Hydraulic Spindle
The basis of the intensifying hydraulic spindle is that it works with a closed oil cylinder. On inserting the piston into the chamber, the pressure due to the section [...]
High pressure vices : Prox spindle
This spindle provides a different clamping solution to that of the rest of the models. This means that the operator can place the piece as near as possible to the machine door, [...]
High pressure vices : Oleo-dynamic spindle
This model has no clutch. The approach to the work-piece, before exerting the high pressure, is carried out with a handle. It has an automatic forward and backward movement of [...]
