On-site digital multimeters for difficult environments
With the MX 20HD, 44 HD, 57Ex, 58HD and 59HD, the Metrixâ brand offers a full range of on-site digital multimeters specially designed for difficult environments: humidity, water, dust, gas, etc.
These Metrixâ multimeters provide a large number of measurements, including voltage, current, HOLD mode, REL mode, diode test, continuity test, resistance, frequency, duty cycle, capacitance and dB, temperature, etc., depending on the model.
The multimeters in this range are rated 600 V CAT II and certified as complying with the EN/IEC 61010-1 standard.
Ergonomics: a screen with a 2,000 to 50,000-count display (depending on model) and a 34-segment fast analogue bargraph (depending on model) makes it very easy to read. The resistant casing is made of self-extinguishing materials, with protection of the batteries/fuses and automatic low-battery detection.
The MX 57Ex is an ATEX and IECEx-certified multimeter for all types of measurements in explosive or non-explosive zones. It complies with the applicable standards and regulations, as well as the European Directives: Low Voltage 2006/95/CE, electromagnetic compatibility EMC 89/3363/CEE and 93/68/CEE.
Product characteristics :
-
DC voltage: 5 calibres from 2,000 V to 1,000 V depending on the models
-
AC voltage: 4 calibres or 5 calibres from 500 mV to 750 V
-
DC bandwidth: 100 Hz
-
DC current from 500 µA (MX 57) to 10 A
-
AC current from 500 µA (MX 57) to 10 A
-
Resistance and continuity: 6 ranges from 200 ohms to 50 Mohms
-
Diode test from 1.2 to 2 V
-
Temperature range from –200 °C to +800 °C on the MX 57 and MX 59 models
On-site digital multimeters for difficult environments
"Multimeters for all uses! A full range of on-site multimeters designed for restrictive industrial environments and offering all the measurements required. A special Electrical Accessories Kit and an Electronics Kit are also available”.
