The CJC™ Gear Flushing Unit is constructed for flushing of renovated or new wind turbine gears with an oil volume in the range 100-500 L.
 
To get a continuous and uninterrupted oil filtration of the flushing oil, the system is divided into two offline systems. One system takes care of the flushing. The flushing is performed with a pump flow of approx. 7000 L/h circulating the gearbox volume of approx. 300 L of oil many times through the system.
 
An offline filter system with 4 parallel connected CJC™ HDU 27/108 stays is build on to the flushing system. The filtration system is running at a lower flow rate, than the flushing system, and will not be stopped, when a gear is disconnected. This secures optimum filtration.
 
A built in CJC™ Particle Monitor makes it possible to do monitoring and logging of the oil cleanliness during the whole gear flushing process.
 
The CJC™ Gear Flushing Unit has an automatic flushing process feature, which saves time. Type in gear oil volume and desired oil cleanliness, push START and the gear flushing process will run fully automatic.