Industry fair   > ATOS SA > Our product range 

Offers 1 to 28 of 28

Electrical cabinet 

View bigger picture
BASIC 19" Cabinets and cases
Contact ATOS SA

BASIC 19" Cabinets and cases

Aesthetic and modern design fits perfectly into an office or data processing environment. Modularity of 19' internal upright in height, width and depth, structural [...]
View bigger picture
19" Cabinets and cases EVOLUTION
Contact ATOS SA

19" Cabinets and cases EVOLUTION

The extent of the evolution range grants the widest availability of sizes and configurations. the considerable modularity of the cabinet facilitates wiring, and its strength the [...]
View bigger picture
19" Cabinets and cases DEXIMA
Contact ATOS SA

19" Cabinets and cases DEXIMA

The DEXIMA range due to the design of its equipotential structure offers multiple possibilities for ETSI, 19', IP55, and EMC variations. The wide modularity of the cabinet [...]
View bigger picture
Cabinets and cases ETSI
Contact ATOS SA

Cabinets and cases ETSI

Fixed and adjustable uprights, upper and lower optimal frame passage, ETSI, 19', aseismic variation, numerous accessories approved and standardized.
View bigger picture
19" Cabinets and cases SERVER
Contact ATOS SA

19" Cabinets and cases SERVER

19' cabinet server version variation for the accommodation of any data processing equipment. The creation of 9.5 mm 19' mounting angles enables rack mountable servers to be [...]
Up

Electrical box 

View bigger picture
Subracks and Systems FERROVIAIRE
Contact ATOS SA

Subracks and Systems FERROVIAIRE

The EUROFER and ECORAIL models are of strong mechanical construction, tested and certified, with flexibility of use which guarantees proven reliability: 'use for more than 20 [...]
View bigger picture
Subracks and Systems NEPTUNE
Contact ATOS SA

Subracks and Systems NEPTUNE

Subracks tested and standardized for total integration of embedded mechanical solutions in 19' format for European cards. Approved marine subracks present on all types of vessels. [...]
View bigger picture
Subracks and Systems CAMAC NIM
Contact ATOS SA

Subracks and Systems CAMAC NIM

Chassis able to support heavy loads, conforming to EUR 4100 and AEC NIM (TID20893) standards. Able to accommodate:25 modules having a 17.2 pitch in CAMAC12 modules having a 34.4 [...]
View bigger picture
19" Cabinets and cases CMR
Contact ATOS SA

19" Cabinets and cases CMR

Space saving. Total access for equipment. Optimal usage for very reduced space requirement. Active equipment visibility. The product design and installation are aesthetic. [...]
View bigger picture
19" Cabinets and cases CMH
Contact ATOS SA

19" Cabinets and cases CMH

Ease of working in the case.For assembly, the case opens completely on the front and on the side.Front uprights are adjustable with oblong cable entries.19' format rear [...]
Up
View bigger picture
19" Cabinets and cases ULTRA
Contact ATOS SA

19" Cabinets and cases ULTRA

Delivered flat for transport space saving and storage. Easily transportable on site. Rapid assembly. Sober and agreeable appearance.Possibility to flap down the 19' front area [...]
View bigger picture
19" Cabinets and cases OPTIMA II
Contact ATOS SA

19" Cabinets and cases OPTIMA II

Delivered flat for transport space saving and storage. Easily transportable on site. Rapid assembly. Sober and agreeable appearance.Possibility to flap down the 19' front area [...]
View bigger picture
19" Cabinets and cases BAIE LAN
Contact ATOS SA

19" Cabinets and cases BAIE LAN

A mechanically screwed structure including:4 external uprights1 frame with an earth stud1 top cover with ventilation cutouts and cable entry cutouts1 front door in smoked [...]
View bigger picture
Atlas chassis
Contact ATOS SA

Atlas chassis

19' chassis intended for non standardized elements (batteries, supplies, measuring cases, etc..). Product able to support considerable loads. Design in zinc plated steel, front in [...]
View bigger picture
Subracks and Systems CUBIC
Contact ATOS SA

Subracks and Systems CUBIC

Side panels of the subrack are 10 mm pierced to position rails at different depths. Numerous configurations or partitions are possible. Alpha series: for installing mother cards. [...]
Up
View bigger picture
Subracks and Systems HYPERRACK
Contact ATOS SA

Subracks and Systems HYPERRACK

The HYPERRACK subrack family complies with EMC requirements for electromagnetic radiations for your electronics, immunity from disturbances caused by or coming from the exterior.
View bigger picture
PIZZA BOX 2U
Contact ATOS SA

PIZZA BOX 2U

Ideal solution for 19' CPCI applications, rackable or table top.Optimized ventilation on hot swap module. Choice of AC or DC supply, one or two supplies. High quality mechanical [...]
View bigger picture
Subracks and Systems SYSTEMS
Contact ATOS SA

Subracks and Systems SYSTEMS

19' standard shielded subrack or according to specifications. 1 or several standardized BUS of VME, VME 64x or Compact PCI (H110) types. Power supply plug-in type or not, 3.3V, [...]
View bigger picture
AMPLITUDE Case
Contact ATOS SA

AMPLITUDE Case

Strong steel case/cabinet, table top version with handles. For the protection of electronic equipment. Especially aesthetic neutral finish for your environment.
View bigger picture
OPTIMA Case
Contact ATOS SA

OPTIMA Case

Strong multifunctional swiveling or fixed wall mounting case for rapid and secured installation. Upper and lower symmetry, 19' uprights adjustable in depth, practical and varied [...]
Up
View bigger picture
OUTDOOR Cases
Contact ATOS SA

OUTDOOR Cases

Extremely strong our range of outdoor cases is available in numerous versions as much at the level of protection as at heat dissipation systems, supply alarm management... Our [...]

Assembly systems and components 

View bigger picture
Mechanical assembly
Contact ATOS SA

Mechanical assembly

As a result of its experience ATOS company, in addition to its thin sheet metal working know how, has developed skills which enable it to carry out:- assemblies and complex [...]

Cutting machines 

View bigger picture
Thin sheet metal, subcontracting CUTTING
Contact ATOS SA

Thin sheet metal, subcontracting CUTTING

Adapted to large scale methods, cutting is totally managed by ATOS.An indispensable part of traditional thin sheet metal working the following know how is managed [...]

Painting, Painting accessories 

View bigger picture
Paint
Contact ATOS SA

Paint

For many years the paint process has been controlled by ATOS in order to deal with aesthetic, surface condition, and painted surface protection constraints.ATOS company is [...]

Protyping, Materials test 

View bigger picture
Prototypes
Contact ATOS SA

Prototypes

For the most complex of project implementations, as with a large number of simple projects, the model stage followed by that of the prototype is an essential key stage for the [...]
Up

Office tables 

View bigger picture
Bureautique table rack
Contact ATOS SA

Bureautique table rack

Designed to optimize your equipment installation, ergonomic and granting considerable modularity, it goes with our range of EVOLUTION cabinets and mini cabinets. Your working area [...]

Power unit 

View bigger picture
Thin sheet metal, subcontracting TOOLING
Contact ATOS SA

Thin sheet metal, subcontracting TOOLING

In order to optimize implemented technico-economic solutions and guarantee the quality of its service, ATOS has available integrated tooling departments.This facility allows for [...]
View bigger picture
Thin sheet metal
Contact ATOS SA

Thin sheet metal

The traditional ATOS skill for more than 40 years, accumulated skills and know how for the manufacture of any thin sheet metal part.The permanently involving recent industrial [...]
Open your online booth in less than 1 hour - click here