Modules : ARM-D88 IO
ARM-D88 IO modules are ideal for remote control applications, for supervision or telemetry applications. They are used everywhere to replace cables, in harsh environment thus saving costs and time. For example on production lines or for mobiles applications like forklift drivers calling, conveyors, cranes, etc.
The modules offer a complete plug and play solution and avoid using PLCs or IO terminals.ARM-D88 are equipped with 8 digital inputs and 8 digital outputs.
Modules exist also with analogue IO (0-10 V/ 4-20 mA). They are compatible with the all ATIM A.R.M range (Advanced Radio Modem), for example with the serial/Ethernet radio modem ARM-SE or low cost radio modems ARM-IO. Communication is realized by using mirror mode or ModBus mode.
Les modules ARM-D88 reprennent les fonctionnalités avancées de l’ARM-SE (pages web embarquées, liaison radio sécurisée, LBT: Listen Before Talk, fonction Watchdog, etc…)
ARM-D88 embeddes the same advanced features than the ARM-SE (Web pages, secured radio link, LBT: Listen Before Talk, Watchdog,etc.)
The ARM-D88 has a web server embedded allowing an easy configuration via a web navigator locally or remotely via radio.
The RS485 port allows a ModBus serial link utilization or the interconnection of several modules.
Product characteristics :
-
Modem radio 868 MHz (25 et 500 mW)
-
Norme européenne,sans licence, Configuration par pages Web
-
Solution simple de reports d’états (contacts secs ToR)
-
Architecture modulaire (1 à 16 modules connectés) Jusqu’à 128E / 128S
-
Mode miroir point à point et multi-points
-
Mode ModBus (esclave Modbus) avec fonctions avancées (filtrage,mémorisation, comptage, etc…)
-
Fonctions avancées :répéteur multiple, watchdog…
-
Facilité d’installation
-
Boîtier aluminium pour montage rail DIN
-
Compatibilité avec la gamme ARM (-SE, -IO et ARM-D, -DA)
Technical data sheet
FUNCTIONNALITIES
- Mirror mode point to point or multipoints
- Modbus slave (via radio o via RS485 serial link)
GENERAL INFORMATION
ENVIRONMENT:
- Temperature in use: -20 to +50°C / storage: -30 to +70°C
LEDS & OTHERS:
- 1 Led for each digital input & output
- Disconnectable terminal block with a 3.96mm step
- Coding wheel 16 radio channels & Dip-switchs 4 inters (test mode & res. RS485)
CONNEXIONS
INTERFACES:
- RJ45 10 Base T connector for Web pages configuration
- Terminal block 6 points with: power supply (Vcc / Gnd), RS485 (A / B), one input (IN) (parametrable function, for ex. email alerts) and one output watchdog (OUT).
- Digital Inputs: opto-isolated (common ground): boolean state or counting 32bits (E1 to E8: 1kHz)
- Digital outputs: Mosfets protected (10-30Vcc – 0.5A max)
- Specific version with RS232 instead of RS485 (Contact us)
RADIO »RF » INTERFACE
- Band 868 MHz, version 25 & 500mW
- GFSK modulation – radio baud rate : 9600 / 19 200 bps
CERTIFICATION:
- Directive RTTE1995/5/CE
- ETS300-220-3 v1.1.1
- CEM EN 301 489-3 v1.4.1
- Security
- NF EN60950 Ed.2000
- Conformity RoHS
POWER SUPPLY
- Vcc: 10-30Vcc
- Consumption à 12V: 400mA during emission, 115mA during reception
- Optimized sleep mode < 1mA (without IO consumption)
COMPATIBILITY WITH ALL THE ARM RANGE
- ARM-SE: Radio modemSerial / Ethernet
- ARM-D: Version « Digital » 2 inputs, 2 outputs
- ARM-DA: Version « Digital » & « Analog »
- ARM-IO: Version -D / -A / -S / -D-LP / -A-LP
- ARM-X: Old versions extension modules.
- ARM-D88: 8DI+8DO (optocuppled / Vmos)
- ARM-DAI/I: 4DI+4DO + 4 inputs 4-20mA
- ARM-DAO/I: 4DI+4DO + 4 outputs 4-20mA
- ARM-DAI/U: 4DI+4DO + 4 inputs 0-10V
- ARM-DAO/U: 4DI+4DO + 4 outputs 0-10V
- ARM-…: Contact us for specific needs.
Modules : ARM-D88 IO
3 reasons to choose this solution: - Free license ISM band - Digital remote IO (8 DI + 8 DO) - Digital & Analog
Modules : ARM-D88 IO
-
Energy (Hydroelectric centrals…)
-
Water management
-
Secured remote control
-
Cranes, Warehouse, convoyers
-
Warehouse, convoyers
