Industrial suppliers
> Mechanics, Hydraulics and Pneumatics
> Mechanic components
> Assembly systems and components
>
All offers
Assembly systems and components
Manufacturers' and suppliers' offers for «Assembly systems and components» . Compare offers for «Assembly systems and components» and ask for a quote online.
Offers to 1 of 50 sur 278
Adjustable handles ERX
Lever bodyGlass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.ColourGrey-black, matte finish.Push [...]
SPRING ALIGNMENT DOWELS/BUSHINGS
Spirol’s roll formed hardened bushings are designed to meet one or more of the following objectives: Align mating components, Eliminate drilling of a [...]
1/ SPRING ACTION : The diameter of the bushing is slightly larger than the hole. The spring action of the bushing allows it to be installed into a drilled or cored hole and assume [...]
PRECISION MACHINED NUTS
SPIROL offers a comprehensive line of standard precision-machined nuts designed for a broad set of applications. Our products are clean, burr free, and ready to use. [...]
COSMETIC PINS
The unique flexibility of the Series 550 Cosmetic Pin, an extra light duty coiled spring pin, makes it the ideal fastener for light duty plastic hinge [...]
The use of a coiled spring pin will simplify your design and manufacturing process. Assembly is easier and less expensive, with no broken hinges, and finished products are more [...]
Drive housing C 60-180 J
Weight : 49 kg (108 lbs.) Chain angle : 180° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 262.5 mm (10.6 [...]
Return housing CR90-90 D
Weight : 135 kg (297.6 lbs.) Chain angle : 90° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 438 mm [...]
Drive housing C 90-90 D
Weight : 170 kg (374.8 lbs.) Chain angle : 90° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 438 mm [...]
Assembly Tables 250/500/1000 kg
These assembly tables are stable welded structures with adjusting and fixing holes for fixing on the floor. A special foundation is not required. The guiding profiles are [...]
Hinges in plastic
Material : Glass-fibre reinforced thermoplastic;axle in stainless steel Surface finish : Hinge black, [...]
Pinion support washer
Pinion stop for transmission systems. Die-cutting and stamping in a transfer process.
Surface protection
Expansion gap compensation
Impact and vibration damping
Energy pool
Stress limitations
Wear compensation, etc.
Standard flat washer
Our flat washers, made to NF & ISO standards, enhance clamping force distribution.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Special flat washer
Our special flat washers for fasteners are made with high-speed processes to customer specifications and drawings in the following range of sizes :OD from 10 to 250 mmThicknesses [...]
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
DISC SPRINGS
Disc Springs are conically-shaped, washer-type components designed to be axially loaded. What makes Disc Springs unique is that based on the standardized calculations of DIN [...]
The advantages of Disc Springs compared to other types of springs
include the following:
• A wide range of load/deflection characteristics,
• High load capacity with small [...]
METAL SPACERS
Metal Spacers are used as stand-offs, distance bushings, sleeves, axles and pins. SPIROL® Series SP100 Standard Wall and SP150 Heavy Wall Metal Spacers replace cut-off [...]
INSERTS FOR PLASTICS
SPIROL offers heat/ultrasonic, molded-in, press-in, expansion, and self-tapping inserts. Our standard inserts have been designed for a broad set of plastic [...]
• Use in a wide range of plastics
• reusable Thread
• Good range of torque
• No tension relaxation
• Load capacity strengthened
COMPRESSION LIMITERS
Compression Limiters are designed to protect the plastic components of an assembly from the compressive loads generated by tightening bolts. Spirol's slit seam compression [...]
SOLID PINS AND DRIVE STUDS
Standard Solid Pins and Drive Studs : Specifying SPIROL Solid Pins and Drive Studs provides the lowest cost and the most responsive delivery. Tooling and raw material are [...]
SLOTTED SPRING PINS
Slotted spring pins are headless hollow cylindrical tubes having a longitudinal slot down the entire length with chamfered or round ends to aid installation. For automation [...]
Return housing CR90-180 J
Xeight : 138 kg (304.2 lbs.) Chain angle : 180° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 457 mm [...]
Drive housing C 90-90 J
Weight : 175 kg (385.8 lbs.) Chain angle : 90° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 457 mm [...]
Return housing CR90-180 S
Weight : 97 kg (213.8 lbs.) Chain angle : 180° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 350 mm (15.7 [...]
Return housing CR90-90 S
Weight : 99 kg (218.3 lbs.) Chain angle : 90° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 350 mm (15.7 [...]
Drive housing C 90-180 S
Weight : 118 kg (260.1 lbs.) Chain angle : 180° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 350 mm (15.7 [...]
Drive housing C 90-90 S
Weight : 120 kg (264.6 lbs.) Chain angle : 90° Pitch circle radius = 90 mm (3.5 in.) Dim : 400 mm X 402 mm X 350 mm (15.7 [...]
Return housing cr60-90 r180 d
Weight : 32 kg (70.5 lbs.) Chain angle : 180° with return storage Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 405 mm X 248.5 [...]
Drive housing CR60-90 D
Weight : 46 kg (101.4 lbs.) Chain angle : 180° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 248.5 mm [...]
Drive housing C 60-90 D
Weight : 47 kg (103.6 lbs.) Chain angle : 90° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 248.5 mm (10.6 [...]
Drive housing C 60-90 D
Weight : 47 kg (103.6 lbs.) Chain angle : 90° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 248.5 mm (10.6 [...]
Return housing CR60-180 J
Weight : 29 kg (63.9 lbs.) Chain angle : 180° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 262.5 mm [...]
Return housing CR60-90 J
Weight : 30 kg (66.1 lbs.) Chain angle : 90° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 262.5 mm (10.6 [...]
Drive housing c 60-90 r180 j
Weight : 55 kg (121.3 lbs.) Chain angle : 180° with return storage Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 405 mm X 262.5 [...]
Drive housing C 60-90 J
Weight : 50 kg (110.2 lbs.) Chain angle : 90° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 262.5 mm [...]
Return housing CR60-90 R180 S
Weight : 7.9 kg (17.4 lbs.) Chain angle : 180° with return storage Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 405 mm X 204 [...]
Drive housing C40-90
Weight : 13.2 kg (29.1 lbs.) Chain angle : 90° Pitch circle radius = 40 mm Dim : 200 mm X 201 mm X 164 mm (7.9 in. X [...]
Drive housing C40-180
Weight : 12.4 kg (37.3 lbs.) Chain angle : 180° Pitch circle radius = 40 mm Dim : 200 mm X 201 mm X 164 mm (7.9 in. X [...]
Drive housing c 60-90 s
Weight : 31.8 kg (70.1 lbs. / ft.) Chain angle : 90° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 204 mm [...]
Drive housing c 60-180 s
Weight : 30.9 kg (68.1 lbs.) Chain angle : 180° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 204 mm (10.6 [...]
Drive housing C 60-90 R180 S
Weight : 34.1 kg (75.2 lbs.) Chain angle : 180° with return storage Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 405 mm X 204 [...]
Return housing CR60-90 S
Weight : 17 kg (37.5 lbs.) Chain angle : 90° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 204 mm (10.6 [...]
Return housing CR60-180 S
Weight : 7 kg (15.4 lbs.) Chain angle : 180° Pitch circle radius = 60 mm (2.4 in.) Dim : 270 mm X 271 mm X 204 mm (10.6 [...]
Tapered washer
Designed for medium-stress applications, tapered washers ensure that bolted assemblies do not loosen.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Tapered washer Delta type
Special shaped washers for specific fastenings (e.g. stainless steel tapered washer) are manufactured with high-speed processes to customer specifications.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Special shaped washers
These washers can be adapted to the widest range of specifications, e.g. this lock washer, produced by die-cutting and bending, combines clamping force distribution and [...]
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Calibrated special flat washer
Made with a die-cutting and cold calibration process, the calibrated special flat washer evenly distributes clamping force over “stepped” surfaces.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Special serrated tapered washer
A calibrated, tapered and serrated washer widely used in the automobile industry.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Captive washer for nut
For efficient and easy control of clamping force in a dedicated assembly.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Washer with serration on one side and chamfer
Serrated washers with optional chamfering, serration on one or both sides and any number of teeth, play a crucial role to prevent unscrewing on soft materials.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Washer with serration on one side 24 teeth
Serrated washers with optional chamfering, serration on one or both sides and any number of teeth, play a crucial role to prevent unscrewing on soft materials.
Surface protection
Distribution of clamping force and "closure" of wide clearances
Resistance to loosening
Tensioning and fatigue resistance for bolts
Take-up of [...]
Top Products
