Industry fair   > AMECA > Our product range 

Offers 1 to 34 of 34

Balls 

View bigger picture
Ball type pins
Contact AMECA

Ball type pins

The ball type pins are used for all applications requiring the hand to be quickly removed after insertion or shifting.  The ball type pins are fitted and removed quickly, [...]

Ratchet, Socket, Accessories 

View bigger picture
Self -tapping bushes
Contact AMECA

Self -tapping bushes

The bush with its cutting slot is a self-tapping attaching part which ensures screwed assemblies for high loads, without wear in case of frequency disassembly of the screw and [...]
View bigger picture
Key type bushes
Contact AMECA

Key type bushes

The CLAV-SERT thread inserts consist of rigid one-piece bushes Depending on the diameter of the insert, 2 or 4 grooves in the bush have 2 or 4 locking [...]

Assembly systems and components 

View bigger picture
Spring type threaded push rods
Contact AMECA

Spring type threaded push rods

Threaded push rods are used for indexing and positioning necessary for mechanical assemblies.  They can also be used as ejectors.
View bigger picture
Plug tap
Contact AMECA

Plug tap

Entry on 2 leads. For through holes and blind holes. Tapping by hand or by machine.  
Up
View bigger picture
Machine tap for 35° to 39° right-hand helical grooves
Contact AMECA

Machine tap for 35° to 39° right-hand helical grooves

Entry on 2 to 3 leads. For blind holes. For all materials which are difficult to machine.      
View bigger picture
Inspection stamp
Contact AMECA

Inspection stamp

Allows checking the tap which must be fitted with an AMECOIL thread insert.  
View bigger picture
Conventional series installation
Contact AMECA

Conventional series installation

Multiple-dimension with tip + threaded pin.  
View bigger picture
Amecoil SR series installation
Contact AMECA

Amecoil SR series installation

Multiple-dimension with threaded pin.      
View bigger picture
Self-crimping stud for press fitting
Contact AMECA

Self-crimping stud for press fitting

For assembly by screwing with high characteristics (tearing stresses, various loads, etc.) in thin sheet metal. This type of stud gives high-performance attachments. Dimensions: [...]
Up
View bigger picture
Column-Spacer for press fitting
Contact AMECA

Column-Spacer for press fitting

This column has been specially designed to serve as spacer. It can be fitted quickly and easily and thus saves cost. It simplifies conventional assemblies. • 2 models: With a [...]
View bigger picture
Flush nut for press fitting
Contact AMECA

Flush nut for press fitting

The flush nut is used in numerous assembly application requiring the fitting of a nut in the material. It allows, among other, an alignment, particularly in places which are [...]
View bigger picture
Self-crimping nut for press fitting
Contact AMECA

Self-crimping nut for press fitting

To obtain a screwed assembly with a high load capacity for sheet metal parts with a thickness of 0.8 mm or more, made of steel, light alloys, non-ferrous metals (up to a hardness [...]
View bigger picture
Self-crimping cage nut (Square or oblong indenting device)
Contact AMECA

Self-crimping cage nut (Square or oblong indenting device)

- Dimensions: M3 to M12
View bigger picture
Weld lugs
Contact AMECA

Weld lugs

The weld lugs are available in numerous dimensions and types in order to meet all your specific welding solutions. Quick and easy to fit, AMECA weld lugs offer high resistance to [...]
Up
View bigger picture
"Ball Lock"® ball type quick-release attaching system
Contact AMECA

"Ball Lock"® ball type quick-release attaching system

Ball Lock”® ball type quick-release attaching system.  Change your assemblies in 60 seconds or less.  
View bigger picture
AMELOCK self-locking nut
Contact AMECA

AMELOCK self-locking nut

AMELOCK is a safety nut whose locking part is obtained by deformation of an AMECOIL AF thread insert. AMELOCK has numerous advantages: Eliminates cotter pins, lock nuts and [...]
View bigger picture
Flat headed cylindrical “AMSERT”
Contact AMECA

Flat headed cylindrical “AMSERT”

Cylindrical flat headed embedded.  
View bigger picture
“AMPLAST” inserts for plastics
Contact AMECA

“AMPLAST” inserts for plastics

For the execution of professional assembly by screws of low resistance and fibrous materials: • Plastics • Wood and its derivatives • Composite materials

Extractor 

View bigger picture
Extractor
Contact AMECA

Extractor

AMECOIL extractors are used to remove thread inserts which are incorrectly laid.  
Up

Tools 

View bigger picture
The AMECOIL kits
Contact AMECA

The AMECOIL kits

AMECOIL® SR kits are indispensable for repairing all types of defective tapped holes. Regular workshop kits, they are necessary for the factory servicing and maintenance [...]
View bigger picture
Minikits
Contact AMECA

Minikits

Contents:    FROM M 2.5 TO M 8  1 drill bit 1 tap + 1 handle for turning 1 installation pin + 1 handling knob 5 AMECOIL®SR thread inserts FROM M 10 TO M 16 1 [...]
View bigger picture
Socket and key kit
Contact AMECA

Socket and key kit

Indispensable for repairing faulty tapped holes. Delivered with installation tools.

Clamping tools, Tightening tools 

View bigger picture
Slotted self-locking nut
Contact AMECA

Slotted self-locking nut

The slotted nut is used in numerous assembly applications subjected to vibrations, in places which are difficult to reach. The slotted nut is made completely of metal and can be [...]
View bigger picture
Standard "AMECOIL" thread inserts
Contact AMECA

Standard "AMECOIL" thread inserts

Because of its optimal dimensions, the SR series keeps all the characteristics of the conventional series while offering additional advantages for installation and use: • Easier [...]
Up
View bigger picture
Self-locking "AMECOIL" thread inserts
Contact AMECA

Self-locking "AMECOIL" thread inserts

This self-locking series corresponds in all points to the conventional series, the screw threads being locked by polygonal deformation of one or more turns of the thread. This [...]
View bigger picture
“AMSERT” thin countersunk head embedded nuts
Contact AMECA

“AMSERT” thin countersunk head embedded nuts

Thin cylindrical countersunk head embedded open nut.  
View bigger picture
"AMSERT" thin countersunk head embedded nuts
Contact AMECA

"AMSERT" thin countersunk head embedded nuts

THIN CYLINDRICAL COUNTERSUNK HEAD EMBEDDED OPEN NUT
View bigger picture
"AMSERT" hexagonal and mixed embedded nuts
Contact AMECA

"AMSERT" hexagonal and mixed embedded nuts

HEXAGONAL CYLINDRICAL FLAT HEAD EMBEDDED OPEN NUT.  

Boring, Drilling tools 

View bigger picture
Drilling
Contact AMECA

Drilling

The hole is drilled using a commercially available standard drill bit.  
Up

Positioners and Tightening components 

View bigger picture
Plastic strips
Contact AMECA

Plastic strips

The packing of AMECOIL thread inserts on plastic strips considerably improves working conditions for series installation: higher efficiency, absence of risk of mixing inserts, [...]

Drill tap machine 

View bigger picture
Taper tap
Contact AMECA

Taper tap

Entry on 4 leads. For through holes and blind holes. Can be used on all metals and for high precision tapping.  
View bigger picture
Straight groove machine tap with "GUN cut" entry
Contact AMECA

Straight groove machine tap with "GUN cut" entry

Entry on 4 leads. For through holes. The "GUN" cut drives the chips out on the other side.   

Whitesmith's shop 

View bigger picture
Break punches
Contact AMECA

Break punches

They are used to break the thread drive pin.  Hand operated or automatic models available.  
Open your online booth in less than 1 hour - click here