Industry fair   > Mechanics, Hydraulics and Pneumatics   > Mechanic components   > Assembly systems and components   > AMECA > Our product range 

Offers 1 to 16 of 16

See all the company's offers

Assembly systems and components 

View bigger picture
Spring type threaded push rods
Contact AMECA

Spring type threaded push rods

Threaded push rods are used for indexing and positioning necessary for mechanical assemblies.  They can also be used as ejectors.
View bigger picture
Plug tap
Contact AMECA

Plug tap

Entry on 2 leads. For through holes and blind holes. Tapping by hand or by machine.  
View bigger picture
Machine tap for 35° to 39° right-hand helical grooves
Contact AMECA

Machine tap for 35° to 39° right-hand helical grooves

Entry on 2 to 3 leads. For blind holes. For all materials which are difficult to machine.      
View bigger picture
Inspection stamp
Contact AMECA

Inspection stamp

Allows checking the tap which must be fitted with an AMECOIL thread insert.  
View bigger picture
Conventional series installation
Contact AMECA

Conventional series installation

Multiple-dimension with tip + threaded pin.  
Up
View bigger picture
Amecoil SR series installation
Contact AMECA

Amecoil SR series installation

Multiple-dimension with threaded pin.      
View bigger picture
Self-crimping stud for press fitting
Contact AMECA

Self-crimping stud for press fitting

For assembly by screwing with high characteristics (tearing stresses, various loads, etc.) in thin sheet metal. This type of stud gives high-performance attachments. Dimensions: [...]
View bigger picture
Column-Spacer for press fitting
Contact AMECA

Column-Spacer for press fitting

This column has been specially designed to serve as spacer. It can be fitted quickly and easily and thus saves cost. It simplifies conventional assemblies. • 2 models: With a [...]
View bigger picture
Flush nut for press fitting
Contact AMECA

Flush nut for press fitting

The flush nut is used in numerous assembly application requiring the fitting of a nut in the material. It allows, among other, an alignment, particularly in places which are [...]
View bigger picture
Self-crimping nut for press fitting
Contact AMECA

Self-crimping nut for press fitting

To obtain a screwed assembly with a high load capacity for sheet metal parts with a thickness of 0.8 mm or more, made of steel, light alloys, non-ferrous metals (up to a hardness [...]
Up
View bigger picture
Self-crimping cage nut (Square or oblong indenting device)
Contact AMECA

Self-crimping cage nut (Square or oblong indenting device)

- Dimensions: M3 to M12
View bigger picture
Weld lugs
Contact AMECA

Weld lugs

The weld lugs are available in numerous dimensions and types in order to meet all your specific welding solutions. Quick and easy to fit, AMECA weld lugs offer high resistance to [...]
View bigger picture
"Ball Lock"® ball type quick-release attaching system
Contact AMECA

"Ball Lock"® ball type quick-release attaching system

Ball Lock”® ball type quick-release attaching system.  Change your assemblies in 60 seconds or less.  
View bigger picture
AMELOCK self-locking nut
Contact AMECA

AMELOCK self-locking nut

AMELOCK is a safety nut whose locking part is obtained by deformation of an AMECOIL AF thread insert. AMELOCK has numerous advantages: Eliminates cotter pins, lock nuts and [...]
View bigger picture
Flat headed cylindrical “AMSERT”
Contact AMECA

Flat headed cylindrical “AMSERT”

Cylindrical flat headed embedded.  
View bigger picture
“AMPLAST” inserts for plastics
Contact AMECA

“AMPLAST” inserts for plastics

For the execution of professional assembly by screws of low resistance and fibrous materials: • Plastics • Wood and its derivatives • Composite materials
Open your online booth in less than 1 hour - click here