BT Class2-Data - Class 2 Bluetooth® module for data/audio transmission - ADEUNIS RF

BT Class2-Data - Class 2 Bluetooth® module for data/audio transmission

BT Class2-Data - Class 2 Bluetooth® module for data/audio transmission

This miniature module allows a Bluetooth® two-way transmission of data over a range of 20m. This module is Bluetooth® V2 certified in the End Product category allowing clients [...] + informations

BT Class2-Data - Class 2 Bluetooth® module for data/audio transmission

This miniature module allows a Bluetooth® two-way transmission of data over a range of 20m.

This module is Bluetooth® V2 certified in the End Product category allowing clients who embed our solution to directly use the Bluetooth® label.
The transmission and configuration of data is done via a UART serial interface TTL type. The gross throughput rate is 723kbps. It is equipped with an integrated antenna or a uFL antenna connector.

The embedded SPP profile allows the BT Class2-Data module to establish a wireless serial link to a PDA, laptop, mobile phone, or other device with a Bluetooth® function.

Product characteristics :

  • Class 2 Bluetooth®

  • Frequency on the free wavebands 2.4 – 2.5GHz

  • Totally complies with the Bluetooth® V2.0 standard

  • Radio rate up to 723 kbps

  • Serial link rate: 921.6 kbps

  • Integrated miniature antenna on the PCB

  • On-board SPP profile totally compatible with the PDA, portable PC and Bluetooth® GSM

  • The modules are Bluetooth certified as 'End Product'

  • CODEC audio integrated on the PCB (13-bit PCM CODEC)

BT Class2-Data - Class 2 Bluetooth® module for data/audio transmission

Features * Bluetooth 2.1 stack (Chipset CSR Bluecore4-Ext) Baseband - Link Manager - L2CAP - RFCOMM - SDP - SCO * Data profiles: SPP - OPP - DUN Performance * Frequency: FHSS / 2.402 to 2.480GHz * Radiated RF power: 2mW with integrated antenna * RF sensitivity: -86dBm (BER 10-3) * Range: up to 30m * Air rate: up to 3Mbps EDR Power consumption & requirements * Operating voltage: 3.3V typ (from 2.85V to 3.6V) * Max TX consumption: 60mA * Typical RX consumption: 40mA * Standby consumption: 1 to 6mA Interfaces * UART with flow control * PCM * UART programmable speed: from 9.6 to 921.6kbps General information * Operating temperature: -35°C / +70°C * Dimensions: 22 x 14 x 3 mm * Standards: EN 300-328 / EN 301-489 / FCC part 15 / IC * Mounting: SMD

BT Class2-Data - Class 2 Bluetooth® module for data/audio transmission

  • File transfer

  • Wireless data acquisition

  • Wireless Piconet control automation peripheral

  • Cars

  • Headphones

A logo of InfoPro Communications